Active Member
|
[China]
Address: Building C, No. 888 Huanhuxi Rd., Lingang New Area, China (Shanghai) Pilot Free Trade Zone
Contact name:Michael Yang
Wesen Technologies (Shanghai) Co., Ltd. |
|
|
1.5" 30 psi Axial Mount Manometer 1/8 PT Hydraulic Pump All Stainless Steel Pressure Gauge
Description
The pressure to be measured: a pressure gauge is chosen according
to its measurement range, for analog dial pressure gauges, the
operating pressure must be between 1/3 and 2/3 of the range.
Overpressure: pressure gauges have a limited resistance to
overpressure (pressure higher than the maximum of the range), so it
is necessary to be sure that the pressure gauge will be able to
withstand any overpressure that may occur in the circuit. Common
pressure gauges can handle 1.15 to 1.3 times their maximum
pressure, beyond this you will have to look for a special pressure
gauge or install a pressure limiter upstream to the gauge on the
circuit.
Applications
For aggressive gaseous and liquid media that are not highly crystallising, also operates in aggressive environments
Oil and gas industry, chemical and petrochemical industry, pumbling and HVAC, hydraulics and pneumatics
Machine building and general plant construction
Special features
Excellent load cycle stability and shock resistance
Design per EN 837-1
Completely from stainless steel
Scale ranges up to 0 ... 1600 bar
Design | EN 837-1 |
Nominal size | 40mm |
Accuracy | 2.5 |
| Pressure range | 30 psi (customized) |
Pressure limitation | Steady: 3/4 x full scale value |
| Medium temperature | Unfilled gauge: -40 ... +200 °C [-40 ... +392 °F] Gauge with glycerine filling: -20 ... +100 °C [-4 ... +212 °F] Gauge with silicone oil filling: -40 ... +100 °C [-40 ... +212 °F] |
Ambiet temperature | Unfilled gauge: -40 ... +60 °C [-40 ... +140 °F] Gauge with glycerine filling: -20 ... +60 °C [-40 ... +140 °F] Gauge with silicone oil filling: -40 ... +60 °C [-40 ... +140 °F] |
Temperature effect | When the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.4 %/10 K of the span |
Process connection | Stainless steel, SUS 304, SUS 316 |
Pressure element | Stainless steel, C-type or helical type |
| Movement | Stainless steel |
| Dial | Aluminium, white, with pointer stop pin Black and red lettering |
| Pointer | Aluminium |
| Case | Stainless steel |
| Ring | Bayonet ring, stainless steel |
| Window | Plastic, glass |
| Unit | bar, psi, kg/cm2, kPa, MPa |
| Thread | G, BSP, PT, BSPT, NPT |
| Options | Other process connection Surface mounting flange Mounting bracket |
Ordering information
Model / Dial size / Pressure Range / Process connection / Options
