|
[China]
Trade Verify
Address: G16, 66 Chunhui Middle Road, Xishan Economic Development Zone, Wuxi city, China
Contact name:Julie
Wuxi Laiyuan Special Steel Co., Ltd. |
|
Verified Suppliers
|
|
|
Factory price ASTM A53 A36 schedule 10 carbon steel pipe
Specification ASTM A36 covers carbon steel products including pipes, which can be used in the construction of bridges and buildings. The specified ASTM A36 Carbon Steel Seamless Pipe could also be used for customary structural purposes. The specification calls for the performance of a heat analysis on the products. The heat analysis is carried out on the Astm A36 Schedule 40 Steel Pipe in order to determine the required chemical composition.
LSAW Steel Pipe
Longitudinal Submerged-Arc Welded Steel Pipe
Usage: Used for low pressure liquid delivery, such as water, gas,
and oil.
Process:
LSAW - UO(UOE),RB(RBE),JCO(JCOE)
DSAW -Double Submerged arc welded
Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, GB/T3091, GB/T9711
Certificate: API 5L PSL1 / PSL2, API 5CT
Out Diameter: 355.6mm– 1626mm
Wall Thickness: 8 -50mm
Length: up to 12m
Steel Grade:
API 5L: GR B, X42,X46, X56, X60,X65,X70
ASTM A53: GR A, GR B, GR C
EN: S275, S275JR, S355JRH, S355J2H
GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555
| Standard | Grade | Process | Chemical Composition % | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C max | Mn* | P max | S max | Si min | Cr˟ max | Cu˟ max | Ni˟ max | Mo˟ max | V˟ max | |||
| ASTM A36 | B | SMLS | 0.30* | 0.29-1.06 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.40 | 0.15 | |
| ASTM A36 Grade A | ASTM A36 Grade B | ASTM A36 Grade C | ||
|---|---|---|---|---|
| ASTM A36 | Tenside strength, min, psi (MPa) | 48000(330) | 60000(415) | 70000(485) |
| Yield strength, min, psi (MPa) | 30000(205) | 35000(240) | 40000(275) | |
ASTM A36 low carbon and structural steel plate is highly used in construction of oil rigs and in forming bins, tanks, bearing plates, rings, jigs, cams, forgings, templates, gears, base plates, stakes, fixtures, sprockets, forgings, brackets, ornamental works, stakes, agricultural equipment, automotive equipment, machinery parts and frames. This steel plate is also used for various parts that are produced by flame cutting. The parts include walkways, boat landing ramps, parking garages, and trenches. The ductility of this steel plate allows the alloy to be used neither as cable nor as reinforcing bar. This steel is strictly regulated by ASTM that is by American Society for Testing and Lindenhurst health and fitness center Materials.
The machinability rate of this steel plate is approximately 72 percent, and the average surface cutting feed of this A36 is 120 feet per min. This ASTM steel plate is an easy steel to weld and it can be welded by using any type of welding methods and also the welds and joints that are formed are of top-notch quality. Coming to the heating treatment, any standard carburizing and the hardening methods of AISI 1018 steel is perfect for this steel plate.
ASTM A36 steel plate is subjected to the normalization treatment at 899°C to 954°C that is at 1650°F to 1750°F, to annealing treatment at 843°C to 871°C that is at 1550°F to 1600°F, to stress relieving process at 677°C to 927°C that is at 1250°F to 1700°F, to carburizing process at 899°C to 927°C that is 1650°F to 1700°F and to hardening process at 788°C to 816°C that is 1450°F to 1500°F. Hardening process is strongly required when hardness and strength are the desired prime properties in design. Normalization treatment is done as the final treatment after the manufacturing process.
The properties of this steel plate allow it to deform steadily as the stress is increased beyond its yield strength in order to allow the bridges, buildings and any other constructions to stand long enough by allowing the inhabitants to exit safely before any collapse takes place. This steel plate has very good yield strength that is it has yield strength of 36,000 psi and it also has a high allowable bending stress of 22,000 psi.
1.Payment: T/T, L/C, Western Union, MoneyGram,PayPal; 30% deposits; 70% balance before delivery.
2.MOQ: 1pcs
3.Warranty : 3 years
4.Package Informations: 1) EXPORT, In 20 feet (GW 25 ton) or 40 feet Container (GW 25 ton)
2)as customer's requirement
(1) The leading exporter in China special steel industry.
(2) Large stocks for various sizes, fast delivery date.
(3) Good business relationship with China famous factories.
(4) More than 7 years steel exporting experience.
(5) Good after-sales service guarantee.
