|
[China]
Trade Verify
Address: No 999,Airport Road,wenzhou industry park,zhejiang china
Contact name:Bain
WENZHOU ZHEHENG STEEL INDUSTRY CO;LTD |
|
Verified Suppliers
|
|
|
Butt welding stainless steel Tee equal or reducing pipe fittings seamless or welded
"Zheheng steel" specializes in producing super duplex stainless steel equal tee, reducing tee, reducing pipe (eccentric, concentric), flanging, pipe cap, flange.This product strictly follows ASTM ASME B16.9, DIN, JIS and other standards.The materials used are F57 S39277 and other stainless steel materials.
S39277 stainless steel pipe tee is a duplex stainless steel formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition.
It has a very high tensile strength among wrought duplex stainless steels. In addition, it has a moderately high thermal conductivity and a fairly high embodied energy.
The graph bars on the material properties cards below compare S39277 stainless steel pipe tee to: wrought duplex stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Product range:
F57 S39277 Super Duplex Stainless Steel Pipe Tee Chemical Composition
| Element | Composition, % |
| Carbon | 0.025 max |
| Manganese | 0.80 max |
| Phosphorus | 0.025 max |
| Sulfur | 0.002 max |
| Silicon | 0.80 max |
| Nickel | 6.5 - 8.0 |
| Chromium | 24.00 - 26.0 |
| Molybdenum | 3.0 - 4.0 |
| Nitrogen | 0.23 - 0.33 |
| Copper | 1.20 - 2.00 |
| Tungsten | 0.8 - 1.2 |
F57 S39277 Super Duplex Stainless Steel Pipe Tee Mechanical Properties
| Property | Value | |
| Tensile Strength, min, ksi, [MPa] | 120 [825] | |
| Yield Strength, min, ksi [MPa] | 90 [620] | |
| Elongation in 2 in. or 50mm, min, % | 25 | |
| Hardness, max | HBW | HRC |
| 290 | 30 | |
Dimensions of Straight Tees and Crosses
| Nominal Pipe Size (NPS) | Outside Diameter at Bevel | Center-to-End | |
| Run, C | Outlet, | ||
| M | |||
| [Notes ⑴ and ⑵] | |||
| 1/2” | 21.3 | 25 | 25 |
| 3/4” | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1-1/4” | 42.2 | 48 | 48 |
| 1-1/2” | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2-1/2” | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3-1/2” | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
| 8 | 219.1 | 178 | 178 |
| 10 | 273 | 216 | 216 |
| 12 | 323.8 | 254 | 254 |
GENERAL NOTE: All dimensions are in millimeters.
NOTES:
(1)Outlet dimension M for NPS 26 and larger is recommended but not
required.
(2)Dimensions applicable to crosses NPS 24 and smaller.
Application:
The products of "zheheng steel" are widely used in paper making, shipbuilding, petroleum, chemical industry, electric power, biological engineering, natural gas, sewage, construction, medicine, food (dairy) and other industries."zheheng steel" products are popular in Europe, America, Japan, Malaysia, Middle East, Vietnam and other international markets, and has achieved good market share and customer satisfaction.In line with the quality immortal, the credit eternal purpose, with the good faith to create the customer's trust, with the quality to meet the customer's requirements, with good after-sales service to solve the customer's worries.
Products show:
