Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
17-7PH Turbine Blade Steel AISI 631 UNS S17700
Description
17-7PH Turbine Blade Steel AISI 631 UNS S17700 is a
precipitation-hardened stainless steel that is well suited for
aerospace and other applications requiring high strength and good
corrosion resistance and formability. 17-7PH Turbine Blade Steel
AISI 631 UNS S17700 is the most formable of all PH Steel
grades and has the highest strength and hardness. 17-7PH Turbine
Blade Steel AISI 631 UNS S17700 is less magnetic than other
PH Steel grades and offers minimal distortion upon heat
treatment.
All of 17-7PH Turbine Blade Steel AISI 631 UNS S17700 conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
17-7PH Turbine Blade Steel AISI 631 UNS S17700
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.09 Si (％): ≤ 1.00 Mn (％): ≤ 1.00 P (％) ≤: 0.040 S (％) ≤: 0.030 Cr (％): 16.0 ~ 18.0 Ni (％): 6.50 ~ 7.70 Mo (％): - Al (%): 0.75 ~ 1.50 | Condition: TH1050 Tensile strength, σb/≥ MPa: 1170 Yield strength, σ0.2/≥ MPa: 965 Elonghation, δ ≥(％): 6.0 Reduction of area, ф ≥ (％): 25 Hardness | HB: 38HRC min. |
Applications:
17-7PH Turbine Blade Steel AISI 631 UNS S17700 used most
often in the Aerospace applications, Chemical processing
equipment, Oil and petroleum refining equipment, Food grade
stainless steel for processing equipment, General metalworking.
| Technical Standard | Equivalent Grade |
| ISO/TS 15510(2003) | X6Cr13 |
| JIS G4303(2005) | SUS 405 |
| KS D3706(2006) | STS 405 |
| IS 6527(2001) | X04Cr13 |
| DIN EN 10088-1(2005) | X6Cr13/1.4000 |
| NF EN 10088-2(2005) | X6Cr13 |
| NF A35-573(1984) | Z6CA13 |
| BS 970-1(1996) | 403S17 |
| ASTM A959(2004) | 405/S40500 |
17-7PH Turbine Blade Steel AISI 631 UNS S17700
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
