Mianyang Baoheng New Material Technology Co.,Ltd |
|
AISI 633 Metal UNS S35000 Stainless Steel Flat Bar AM-350 Bar
Description
AISI 633 Metal UNS S35000 Stainless Steel Flat Bar is a heat treatable austenitic or martensitic alloy, depending on heat treatment. It brings together the strength of heat treatable martensitic grades with the corrosion resistance of some of the chromium nickel austenitic grades. Generally used in applications under 1000 °F where a combination of strength and good corrosion resistance are required.
All of AISI 633 Metal UNS S35000 Stainless Steel Flat Bar refined Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SEP 1923 /GB/T 4162 /SAE AMS 2154 /EN 10228-3.
Products Details
AISI 633 Metal UNS S35000 Stainless Steel Flat Bar AM-350 Forged ESR refined Bar
Chemical Composition (weight%): | C (%): 0.07 ~ 0.11 |
Si (%): ≤ 0.50 | |
Mn(%): 0.50 ~ 1.25 | |
P(%): ≤ 0.025 | |
S (%): ≤ 0.010 | |
Cr (%): 16.0 ~ 17.0 | |
Mo (%): 0.45 ~ 5.00 | |
Ni (%): 0.45 ~ 5.00 | |
Mo (%): 2.50 ~ 3.20 | |
N (%): 0.07 ~ 0.13 | |
Mechanical Properties Under Final Heat Treatment: | Condition: annealing TS, σb/MPa: ≤1380 YS, σ0.2/MPa: 585~620 E, δ(%): 8~12 A, ф(%): - Form: plate,sheet,strip Condition: H850 TS, σb/MPa: 1175 YS, σ0.2/MPa: 1030 E, δ(%): 2~8 A, ф(%): - Form: plate,sheet,strip Condition: H1000 TS, σb/MPa: 1140 YS, σ0.2/MPa: 1000 E, δ(%): 2~8 A, ф(%): - |
Applications:
AISI 633 Metal UNS S35000 Stainless Steel Flat Bar is used in valve and gas turbine components, and industrial cutters which require good strength and corrosion resistance.
Equivalent Grade
AM-350, AISI 633, UNS S35000
AISI 633 Metal UNS S35000 Stainless Steel Flat Bar AM-350 Forged ESR refined Bar
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of AISI 633 Metal UNS S35000 Stainless Steel Flat Bar AM-350 Forged ESR refined Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends etc and Wall thickness will be checked one by one.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.