|
[China]
Trade Verify
Address: Guang Yi Columbus B Tower, Wuxi, Jiangsu, China
Contact name:Helen
Jiangsu Pucheng Metal Products Co., Ltd |
|
Verified Suppliers
|
|
|
JIS SUS316 Sand Blast Stainless Round Bar Bright Annealed S30908
S31008 S31600 S31635
Descriptions
Alloy 309 (UNS S30900) is an austenitic stainless steel developed
for use in high temperature corrosion resistance applications. The
alloy resists oxidation up to 1900°F (1038°C) under non-cyclic
conditions. Frequent thermal cycling reduces oxidation resistance
to approximately 1850°F (1010°C).Grade 310 is a medium carbon
austenitic stainless steel, for high temperature applications such
as furnace parts and heat treatment equipment. It is used at
temperatures up to 1150°C in continuous service, and 1035°C in
intermittent service.316 Stainless Steel UNS S31600. Type 316 (UNS
31600) is an austenitic chromium-nickel stainless steel alloy
containing molybdenum. This addition increases corrosion
resistance, improves resistance to pitting chloride ion solutions
and provides increased strength at elevated temperatures.
Product name | stainless steel round bar |
200 series: 201,202,202Cu,204Cu, | |
300 series:
301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, | |
400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, | |
600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, | |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS
S32760,2304,LDX2101.LDX2404,LDX4404,904L | |
Others: 153Ma,254SMo,253Ma,654SMo,F15,Invar36,1J22,N4,N6 etc | |
Surface finish | Black,bright,rough turned,grinding,centreless Ground etc |
Diameter | 0.5-500mm |
Tolerance | H8,H9 or as required |
Length | <12000mm or according to customer's special request |
Technique | Hot Rolled,Cold Rolled,Cold Drawn,Forged |
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤ 0.03 | 3.5-5.5 | 16.0-18.0 | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 8.0-13.0 | 18.0-20.0 | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 18.0-20.0 | - |
| 309S | ≤0.08 | ≤0.75 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0-15.0 | 22.0-24.0 | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 19.0-22.0 | 24.0-26.0 | - |
| 314 | ≤0.25 | ≤1.5-3.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 19.0-22.0 | 23.0-26.0 | |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-15.0 | 16.0-18.0 | 2.0-3.0 |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.013 | 17.0-19.0 | - |
| 347 | ≤0.08 | ≤0.75 | ≤2.0 | ≤0.045 | ≤ 0.03 | 9.0-13.0 | 17.0-19.0 | |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | - | 11.5-13.5 | - |
| 420 | ≤0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.040 | ≤ 0.03 | - | 12.0-14.0 | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤ 0.03 | ≤0.60 | 16.0-18.0 | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 23.0-28.0 | 19.0-23.0 | - |
| Grade | YS(Mpa) ≥ | TS (Mpa) ≥ | El (%) ≥ | Hardness(HV) ≤ |
| 301 | 200 | 520 | 40 | 180 |
| 304 | 200 | 520 | 50 | 165-175 |
| 304L | 175 | 480 | 50 | 180 |
| 309S | 200 | 520 | 40 | 180 |
| 310 | 200 | 520 | 40 | 180 |
| 316 | 200 | 520 | 50 | 180 |
| 316L | 200 | 480 | 50 | 180 |
| 321 | 200 | 520 | 40 | 180 |
Details
Processing
Packing & Payment
Our Factory
Certificates
FAQ
1. How can I get a quotation from you?
You can leave us a message, and we will reply to every message in
time. Or we may talk online by Trademanager.
And you can also find our contact information on the contact page.
2. Can I get samples before order?
Yes, of course. Usually, our samples are free. we can produce your
samples or technical drawings, all you need to pay is the shipping
cost to you. We can build moulds and fixtures so we can customize
our products based on your demand.
3. What is your delivery time?
It mainly depends on your location and demanded volume. The time of
delivery is usually around 1 month(1*40FT as usual).
We can send it out in 2 days if it has stock.
4. What is your payment terms?
Our usual payment term is 30% deposit and the rest against B/L. L/C
is also acceptable. And the shipping terms are EXW, FOB, CFR, CIF
and DDU. Whichever you like.
5. How can you guarantee the quality of my goods?
We are a factory with 100% pre-delivery inspection which guarantee
the quality.
