|
[China]
Trade Verify
Address: LiangZhuangQiao, Jiaoxi, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province.
Contact name:Johnson Yang
Jiangsu XIANDAO Drying Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
DG Series Air Stream Dryer For Starch
General Description
DG series Air stream dryer is the drying plant for to dry maize,
potato alike and other starch material processed by wet method
after dewatering process. It's also for to dry heat sensitive
powder or slice state material with fast speed.
Wet material is dispersed into a stream of heated air (or gas)
which conveys it through a drying duct. Using the heat from the air
stream, the material dries as it is conveyed.Finished product
collected is using cyclones, and/or bag filters. Typically,
cyclones are followed by scrubbers or bag filters for final
cleaning of the exhaust gases to meet current emission
requirements.
Product details
| Material: | SUS316/SUS304/ CARBON STEEL ,ETC | Heating Source: | Steam / Electrical / Natural Gas Diesel / Etc |
| Temp.: | 100-500℃ | Water Evaporation: | 5-2000kg |
| Control System: | PLC+HMI / Button Control | Motor: | ABB /Siemens/SEW |
Product parameters
| Model | Capacity of starch t/h | Total power KW | Steam consumption Kg/Kg water | Finished starch moisture ％ |
| DG-0.5 | 0.5 | 1.8-2.0 | 12-14％ | |
| DG-0.8 | 0.8 | 21.6 | 1.8-2.0 | 12-14％ |
| DG-1 | 1 | 24.6 | 1.8-2.0 | 12-14％ |
| DG-1.2 | 1.2 | 26.6 | 1.8-2.0 | 12-14％ |
| DG-1.6 | 1.6 | 30.1 | 1.8-2.0 | 12-14％ |
| DG-2 | 2 | 47.6 | 1.8-2.0 | 12-14％ |
| DG-2.6 | 2.6 | 59.5 | 1.8-2.0 | 12-14％ |
| DG-3.2 | 3.2 | 75 | 1.8-2.0 | 12-14％ |
| DG-3.6 | 3.6 | 95 | 1.8-2.0 | 12-14％ |
| DG-5 | 5 | 123.4 | 1.8-2.0 | 12-14％ |
| DG-6 | 6 | 170 | 1.8-2.0 | 12-14％ |
| DG-10 | 10 | 223.5 | 1.8-2.0 | 12-14％ |
| DG-20 | 20 | 440 | 1.8-2.0 | 12-14％ |
Principle
1. In the dryer, high-speed hot air stream sustain raw material in
the suspending state, then the material is dried. Since air stream
speed is very high, and material is suspending in air stream, the
heat transfer surface between air and solid is large, heat transfer
rate is high, and drying time is short(usually within several
seconds). It’s specially suitable for drying heat sensitive
materials.
2. In drying process, clean cool air is heated by air heater, and
mixed with wet starch sent by spiral feeder and material raiser.
Wet starch is dried momentarily. Dry starch is discharged though
centrifuge separator and rotary valve.
Feature
1. This machine combines the whirl technology with the fluidity,
ejection and smashing step technologies.
2. The equipment is compact and small in size, high in production
efficiency and continuous in the production. It has realized that
small equipment can perform the large production.
3. The drying capacity for this machine is big but its energy
consumption is low. Its heat efficiency is high.
4. The material stay time is very short. The quality of the final
products is very good. The machine can be used for drying the heat
sensitive materials.
5. For the negative pressure or the micro-negative pressure
operation, the machine is good for its tightness and high in the
efficiency so as to eliminate the environmental pollution.
6. High drying efficiency providing low energy costs
7. Continuous processing with short processing time
8. Low operator overheads and minimum maintenance costs
9. Controlled residence time enabling high temperature drying
