|
[China]
Trade Verify
Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China
Contact name:Vicky
JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
1.1M2 Heating Area Industrial Rotary Synthetic Drugs Vacuum Drying Machine
Hot medium is put into the jacket for drying, heat exchange is done between the inner wall and materials. After the materials absorb heat, water is evaporated. The evaporated moisture and other gas is exhausted from vacuum pipe by vacuum pump. In the tank it is vacuum state and the rotary of tank makes the materials overturn continuously, so the drying speed is fast and drying intensity is increased, and can achieve the purpose of uniform drying. It is a new style dryer that combines mixing and drying together. It can be used together with condenser and vacuum pump. (If do not need to recover solvent, condenser is not needed).
Working Principle
Confined to the surface of thermal-energy (such as hot water or low
pressure steam the HTF), the heat was passed in the shell dry
materials.
In the drive, as slowly rotating the tank, the tank materials
continuously mixed, so as to achieve the purpose of strengthening
drying.
Materials in a vacuum, steam decline in the material surface water
(solvent) reached saturation point and evaporation, and the vacuum
pump from the timely recovery. Materials internal water (solvent)
continuously to the surface infiltration, evaporation from the
three ongoing process, the material in a very short time to dry
purpose.
Product Application
The machine can mix and dry the powder, crystal material and granule material in chemical industry, pharmaceutical industry, foodstuff industry, metallurgy industry, construction, etc. It can also be used for the concentration of the liquor, disinfection and germicide of the material. The moisture of the material can be dried to be lower than 0.5%.
The machine can save energy sources with low labor and high efficiency, and it only needs 2-4 hours to dry the material (<40% humidity).
Technical Parameters
| Model | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
| Volume inside of tank(L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
| Max loading capacity(L) | 40 | 140 | 200 | 300 | 400 | 600 | 800 | 1400 | 1800 | 2000 |
| Max loading weight(kg) | 20 | 70 | 100 | 150 | 200 | 300 | 400 | 700 | 900 | 1000 |
| Revolution(rpm) | 3-13 | 6 | 5 | 4 | 4 | 4 | ||||
| Heating area(M2) | 1.1 | 2.3 | 2.8 | 3.9 | 5.1 | 6.5 | 8.2 | 12.2 | 16.5 | 18.2 |
| Motor power(kw) | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 |
| Occupied area(mm) | 2160*800 | 2160*800 | 2350*800 | 2560*1000 | 2860*1300 | 3060*1300 | 3260*1400 | 3760*1800 | 3960*2000 | 4400*2500 |
| Rotating height(mm) | 1750 | 2100 | 2250 | 2490 | 2800 | 2940 | 2990 | 3490 | 4100 | 4200 |
| Design pressure of tank(Mpa) | -0.1~0.15 | |||||||||
| Desing pressure of jacket(Mpa) | <0.3 | |||||||||
| Weight(kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 | 6400 | 7500 | 8600 |
Schmatic of Installation
Product Show
electrical, steam, natural gas or other
