|
[China]
Trade Verify
Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China
Contact name:Vicky
JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
5-20rpm Rotating Speed KJG-5 Hollow Paddle Dryer Stainless Vacuum Drying Machine
The continuous horizontal paddle dryer consists of a jacketed trough and two hollow shafts with hollow paddles. On the trough is a cover with the inlet for the material to be dried. The material is dried by heat transfer with the heating medium like steam, thermal oil or hot water which is flowing through the hollow shafts, hollow paddles and dimple jacket or half pipe jacket. The dried product is removed from the discharge chute via a shaftless screw conveyor. The exhaust vapors leave the dryer through an exhaust outlet on the cover. The absence of air during the drying process results in a very safe operation due to lowest oxygen content, a small and compact odour treatment and it offers the possibility of a heat recovery system in the vapour condensing unit due to the high dew point of the off-gas.
KJG-5 Horizontal Hollow Paddle Dryer Main Feature
Hollow shaft dense arrangement with the wedge-shaped hollow blade, the heat medium through the hollow shaft flow through the blade. The effective volume of heat transfer area is very large, the heat medium can be water vapor, can also be hot water or heat conducting oil. The heat transfer medium flows through the shell jacket and the hollow stirring shaft through the rotating joint, and the hollow stirring shaft has a different internal structure according to the type of the heat medium to ensure the best heat transfer effect.
In the pulp and jacket access to hot oil, heating at the same time, the upper part of the discharge port at the same time through the heated dry air after further drying, thus greatly increasing the drying strength of the device. Evaporated moisture from the tail gas out of the dryer, wet air discharged by the induced draft fan outdoors.
KJG-5 Horizontal Hollow Paddle Dryer Technical Parameters
| No. | Item | Parameters | Note |
| 1, | Model | KJG-5 | |
| 2, | Paddle heat transfer area [m2] | 3.5 | Including shaft surface area |
| 3, | Jacket heat transfer area [m2] | 1.5 | |
| 4, | Total heat transfer area [m2] | 5 | |
| 5, | Water evaporation [kg/h] | 50 | |
| 6, | Output capacity [kg/h] | 15-20 | |
| 7, | Diameter of paddle [mm] | 260 | |
| 8, | Effective volume [m3] | 1 | |
| 9, | Speed of rotation [rpm] | 1-15 | |
| 10, | Standard motor rating [kW] | 3 | |
| 11, | Carrier gas flow [m3/h] | 300-500 | |
| 12, | Carrier gas exhaust fan motor rating [kW] | 0.75 | |
| 13, | Machine floor space [L×W×H] | 2816X760X1370 | |
| 14, | Standard lifting weight [kg] | 1500 |
KJG-5 Horizontal Hollow Paddle Dryer Show
