Home Companies JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD

Horizontal Vibrating Continuous Fluid Bed Dryer ZLG-1.5x9 Series For Sugar

Contact Us

[China]

Trade Verify

Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China

Contact name:Vicky

JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Horizontal Vibrating Continuous Fluid Bed Dryer ZLG-1.5x9 Series For Sugar

Country/Region	china
City & Province	changzhou jiangsu

Product Details

ZLG-1.5x9 Series Horizontal Continuous Vibrating Fluidized Bed Dryer For Sugar

Adopts dry pressing technology to pressure material with moisture content of lower than

10% into sheets, and it’s processed into required particles through breaking, granules treaming and screening process.

The material is pressed by exterior force, and passes through the gap between the two rollers which are rotating in different directions, and then it's pressed into sheets. The mass density of material might increase 1.5-3 times, so to achieve required strength.

The material is forced and to be pressed by mechanical force, without any additional ingredients, so to ensure purity.

The dry material is made into granules directly, no need any further drying process. So it's good for product process.

The strength of the particles are high, the mass density is increased more apparently compare to other method of granulation. It's especially applicable for to increase the mass density of product.

The pollution of environment is controlled, the wasted powder is reduced, the packaging fee is decreased and the product is easier in transportation.

The structure is compact, the maintenance is convenient, the operation is simple, the process is short, the energy consumption is low, the efficiency is high, the probability of fault is low, the application range is wide, and the pressure of roller might be adjusted freely

according to the property of material.

The material feeding adopts non-step inverter control, the automation level is high. One operation high control muti-units of machine. The labor intensity is low, and the machine might run continuously in long time.

Adopt high quality alloy, stainless steel, Ti, Cr and other metal for driving parts, the wear-resistance, cossive-resistance, thermo-resistance and pressure-resistance is highly increased. The service life is long.

Dry material powder is fed from the top of the equipment, de-air, screw-pre-press, enter into the gap between the two rollers that are rotating in opposite directions. The pressed material falls down because of surface tension and gravity when passes through pressing section. The noodles shaped material then enters into breaking machine, been smashed by rotating knife. The smashed material enters into granulator, and then the particles and part of powder material enters into sieve by the rolling knife, and then the product is separated. The product up to standard will be conveyed to product silo by conveyor; the material under the sieve should be fed back and should be pressed again. The pressure might adjust by the hydraulic oil cylinder according the requirements of granulation.

Sheet, bar and other shape of product might be procured by choose the relative shape of the grooves on the surface of the roller.

Hopper Lifting Machine.Fine Power recycleParticle of productGrinding & Granulation devicetro-chemical, fine chemical, pharmaceutical, foodstuff, metal powder, Bio-engineering, pesticide, fertilizer, mine and coal

Fluid Bed Dryer Technical Parameters

Model	A	B	C	D	E	F	Weight(kg)
VFBD-3x0.3	3000	300	1350	900	430	1650	1250
VFBD-4.5x0.3	4500	300	1350	900	430	1650	1560
VFBD-4.5X0.45	4500	450	1550	950	430	1700	1670
VFBD-4.5X0.6	4500	600	1650	950	430	1700	1910
VFBD-6x0.45	6000	450	1650	950	430	1700	2100
VFBD-6x0.6	6000	600	1700	1000	500	1700	2410
VFBD-6x0.75	6000	750	1850	1000	600	1850	2340
VFBD-6x0.9	6000	900	2000	1000	600	1850	3160
VFBD-7.5x0.6	7500	600	1850	1000	600	1850	3200
VFBD-7.5x0.75	7500	750	2000	1000	600	1850	3600
VFBD-7.5x0.9	7500	900	2100	1000	600	1850	4140
VFBD-7.5x1.2	7500	1200	2500	1150	800	2050	5190
VFBD-7.5x1.5	7500	1500	2850	1570	800	2370	6426
VFBD-8x1.8	8000	1800	3250	1800	900	2700	8600

Model	Area of fluidized bed(M2)	Inlet air temperature(oC)	Outlet air temperature(oC)	Water evaporation(kg/h)	Vibration motor model	Vibration motor power
VFBD-3x0.3	0.9	70-140	40-70	20-35	YZS8-6	0.75x2
VFBD-4.5x0.3	1.35			35-50	YZS10-6	0.75x2
VFBD-4.5X0.45	2.025			50-70	YZS15-6	1.1x2
VFBD-4.5X0.6	2.7			70-90	YZS15-6	1.1x2
VFBD-6x0.45	2.7			80-100	YZS15-6	1.5x2
VFBD-6x0.6	3.6			100-130	YZS20-6	1.5x2
VFBD-6x0.75	4.5			120-170	YZS20-6	2.2x2
VFBD-6x0.9	5.4			140-170	YZS30-6	2.2x2
VFBD-7.5x0.6	4.5			130-150	YZS30-6	2.2x2
VFBD-7.5x0.75	5.625			150-180	YZS40-6	3.0x2
VFBD-7.5x0.9	6.75			160-210	YZS40-6	3.0x2
VFBD-7.5x1.2	9.0			200-280	YZS50-6	3.7x2
VFBD-7.5x1.5	11.25			230-330	YZS50-6	3.7x2
VFBD-8x1.8	14.4			290-420	YZS75-6	5.5x2

Fluid Bed Dryer Application

This dryer is widely used for drying, cooling, wetting of the products in the light industry, chemical industry, pharmaceutical industry, foodstuff, and etc.

Applicable Materials:

Boric Acid, Borax, Dihydroxybenzene, Malic Acid, Maleic Acid, Monosodium Glutamate, Oxalate, Potassium, Permanganate, Sesame, Pentaerythritol, HPAM, Hypha Protein, Sodium Sulfate, Sodium Borate, Plastic Archon, Catalyst, Baking Soda, Detergent, Quartz Sand, Bean Pulp, Edible Sugar, Refine Salt, Bean, Seeds, Mining Slag, Activated Clay, Compound Fertilizer, and etc.

Fluid Bed Dryer Flow