Home Companies JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD

Stainless Steel 304 Transmission Sewage Sludge Paddle Dryer

Contact Us

[China]

Trade Verify

Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China

Contact name:Vicky

JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Stainless Steel 304 Transmission Sewage Sludge Paddle Dryer

Country/Region	china
City & Province	changzhou jiangsu

Product Details

13M2 Heat Transfer Area Transmission Sewage Sludge Paddle Dryer

1) High thermal efficiency which can reach 95%

2) Heat transfer medium does not contact the product.

3) Gas is not used to convey the product. Off-gas flow is minimal.

4) Precise control of temperature

5) Uniform product quality, through mixing and movement of the product

6) Continuous process on a once-through basis

7) High heat transfer area to process volume ratio - reduced floor space

8) Easy to operate, requires minimal attention

9) Safer than direct drying when processing combustible material

10) Simple durable design for easy and low maintenance

11) Dual counter-rotating shafts with unique intermeshing discs produce intimate mixing, uniform heat transfer, a high heat transfer rate, and a self-cleaning effect.A large heat transfer area to volume ratio is achieved by the use of hollow discs and a jacketed vessel, through which the heating medium flows. The result is a compact machine with less space requirements and lower installation cost.

12) The KJG series Paddle Dryer transports material, regardless of its handling characteristics. Sticky, pasty materials can be transported. Pre-conditioning the feed by mixing with recycled dried product, to make it conveyable, is not required. This results in lower capital, operating, and maintenance cost.

HEAT SOURCES(Temperature at 180ºC - 250ºC)

Heating by Steam

Steam enters the hollow shaft through a rotary joint and is evenly distributed to all paddles. Condensate is removed with each revolution.

Heating by Hot Oil(thermal fluid)

Hot oil(thermal fluid) enters and exits the hollow shaft through a rotary joint. Pressure from the supply pump forces liquid through the hollow paddles.

Product Application

• The materials from such as the medicine t food , chemical industry, etc. can be dried.

• Suitable for pulpiness, paste-like mixture or power raw material.

• Temperature sensing material requiring the low temperature to be dried.

• Raw materials that are easy to oxidize or explode and have strong irritative or toxic.

• Demand to retrieve of the organic solvent.

Technical Parameters

Model	HPD-3	HPD-9	HPD-13	HPD-18	HPD-29	HPD-41	HPD-52	HPD-68	HPD-81	HPD-95	HPD-110	HPD-125	HPD-140
Heat transfer area(m2)	3	9	13	18	29	41	52	68	81	95	110	125	140
Effective volume(m3)	0.06	0.32	0.59	1.09	1.85	2.8	3.96	5.21	6.43	8.08	9.46	10.75	12.18
Speed range(rpm)	5-20	5-20	5-20	5-20	5-20	5-10	5-10	5-10	5-10	1-8	1-8	1-8	1-8
Transmission power(kw)	2.2	4	5.5	7.5	11	18.5	30	37	45	55	75	90	110
Device width(m)	306	584	762	940	1118	1296	1474	1655	1828	2032	2210	2480	2610
Overall width(m)	736	841	1066	1320	1474	1676	1854	2134	2186	2438	2668	2732	2935
Equipment length(m)	1956	2820	3048	3328	4114	4724	5258	5842	6020	6124	6850	7500	7860
Total length(m)	2972	4876	5486	5918	6808	7570	8306	9296	9678	9704	10300	11800	12900
Center height(m)	380	450	534	610	762	915	1066	1220	1430	1560	1650	1760	1856
Total Equipment height(m)	762	838	1092	1270	1524	1778	2032	2362	2464	2566	2668	2769	2838