Option 1:Power Source: Adopt 1 set of 150KVA special resistance
welding transformer as the welding power source. Single-spot
welding. Continuous duty cycle rate is 50%; the output current is
larger than 38000A. The executive standard is GB/15578-2008; the
magnetic permeability of forced temperature control cooling water
silicon steel sheet is larger than 12000GS; special cooling water
subloop; It can ensure the output welding current of the whole
machine is constant and powerful in order to obtain high quality,
high efficiency, stable welding spots.
Option 2: Power Source: Adopt 1 set of 100KVA three-phase DC medium
frequency inverter welding source. Duty cycle rate reaches 50%. The
three-phase power supply is under rectifying through a special
inverter and converted to1000Hz AC voltage and then be transmitted
to a medium frequency transformer to be rectified so as to provide
DC welding current. Compare with general AC pulse power supply,
this kind of power source could be fast and precisely adjusted.
Small impact to the power grid and lower requirement for the power
grid compare with the single-phase welder of the same capacity.
X, Y Axis Automatic Mobile System: The feeding fixture is designed
to move within the range of 900*600mm. It is composed of the coding
servo motor, precision-finished slide and automatic detecting
system. The adjustment is of quick response, high control precision
and powerful driving force. This automatic device is designed as X,
Y axis mobile working table. Use PLC to store the mobile
programming. The setting is easy and convenient.
Welding samples