|
[China]
Trade Verify
Address: Room 501, Xuyuan Building, No. 5003 Longgang Road, Shenzhen, Guangdong, China 518000
Contact name:Kary Hou
GUANGDONG HWASHI TECHNOLOGY INC. |
|
Verified Suppliers
|
|
|
IBC Metallic Grid Mesh Welding Machine Auto IBC Grid Welding Machine
Automatic Production Line for Intermediate Bulk Container IBC tank steel frames. The production process includes welding from galvanized pipes to frame mesh, bending of the outer frame, riveting of the two ends of the bent mesh frame, flattening and punching of the connection between the bottom pipe and the bottom plate of the mesh frame, and welding of the bottom support steel foot using steel feet as the bottom support.
IBC Grid Mesh Welding Machine
Machine Consist by following parts:
a.Double layer per-feeding table
1.Adopting the double layer automatic and consistent raw material
feeding system. Continuous production can be implemented, thus
greatly improving the production efficiency of welding machine.
2.The rear frame part adopts the servo motor drive which connected
by chains, conveying guide rail and bearing are equipped to ensure
the direction of the mould frame .
b. Main weld Frame
The welding part adopts four 250KVA intermediate frequency
transformers, the welding uses the special cylinder, the welding
one time molding. High stability and good consistency.
Upper and lower air cylinder design can ensure the flat welding
position.
Welding electrode with screw design can make the each electrode
more durable.
c. Unloading Table ( automatic unloading available with robotic
arm)
MAIN FEATURES OF IBC STEEL FRAME AUTOMATIC PRODUCTION LINE
The entire machine is operated through human-machine interface and PLC programming, with a high level of automation.
Integrated processing of equipment racks to ensure equipment accuracy, operational stability, and high efficiency.
Select an intermediate frequency inverter resistance welding controller, which has advantages such as fast welding speed, current stability, and good penetration.
Uniform and consistent welding pressure ensures the quality of all welding points.
Double feeding rack design allows for feeding during the operation of the main welding machine, improving production efficiency
Using servo hydraulic pressure, it has the characteristics of fast response, small inertia, and high accuracy
The entire automated production line can quickly achieve frame bending, locking, and punching
Able to make diversified non-standard customization according to various stamping shape requirements of customers
