|
[China]
Trade Verify
Address: Room 501, Xuyuan Building, No. 5003 Longgang Road, Shenzhen, Guangdong, China 518000
Contact name:Kary Hou
GUANGDONG HWASHI TECHNOLOGY INC. |
|
Verified Suppliers
|
|
|
Automatic Welding Machine for Double-Bowl Sink WL-AMF-160K
SPECIFICATION
Model | WL-AMF-160K Stainless steel automatic sink welding machine |
Input Power | Single-phase 380V±10% 50Hz |
Rated Capacity | 160kVA |
Rated Duty Cycle | 25% |
Maximum Secondary Floating Voltage | 9.5VAC |
Max Secondary Short Circuit Current | 38000A |
Diameter of Welding Wheel | 100-120mm |
Width of of Welding Wheel | 3-5mm |
Revolving Speed of Welding Wheel | 1800-4000mm/min Adjustable |
Moving Range of Axis X | ≥1600mm |
Moving Range of Axis Y | ≥600mm |
Moving Range of Axis Z | ≥350mm |
Rated Bleed Pressure | 0.8MPa |
Consumption of Gas | 1m3/h |
Pressure of Source of Water | 0.2Mpa |
Temperature of Source of Water | 10-20°C |
Consumption of Cooling Water | 1000L/H |
APPLICATION
Suitable for sink welding within the range of 1600mm x 600mm. (customized)
DESCRIPTION
This CNC sink welding special machine utilizes the seam welding principle to replace the spot welding electrode with circle welding wheel.
For the sake of ensuring the stability of welding quality, medium frequency inverter power source will be adopted. Adopt the professional automatic control system from Japan Mitsubishi, as long as inputting the data like coordinate data of the position of welding products, welding current, etc., then after turning on the machine, the welding track will automatically finish welding product within the preset procedure. The workers only need to put the work piece onto certain place and then take it away when finishing welding.
FEATURE
1. Adopt medium frequency inverter power source of welding and large flat platform of locating pattern.
2. Use the servo motor to drive axle X (locating mould) and axle Y (welding electrode) to operate under the preset procedure of PLC data.
3. It could store 15 sets of welding models at most (be able to store 15 sets of welding position and welding current of product).
4. According to the stored position of welding spot, the welding product will be located inside the mould and moves horizontally along the X direction and the moving area should be no more than 1200mm.
5. The welding electrode will be designed to move vertically along the Y direction and the moving area should be no more than 620mm. The welding electrode moves from top to bottom within 250mm along the axle Z direction and be able to conduct 360° of rotation under the control of servo motor so it is suitable for welding different angles of products.
