|
[China]
Trade Verify
Address: 605 No.59 Building The Second Industrial Tianliao Community Yutang Street Guangming District Shenzhen China
Contact name:Tina Deng
Shenzhen Best Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Disposable IBP transducers typically consist of a small, flexible catheter that is inserted into an artery, and a transducer that is attached to the end of the catheter. The transducer converts the pressure inside the artery into an electrical signal, which is then transmitted to a monitor that displays the patient's blood pressure in real time.
1. Product Name
PVB PB Single Type Disposable IBP Transducer
2. Technical Parameters
Main technical parameters and working environment requirements: | ||||
Disposable Pressure Transducer | ||||
Barometric pressure | 70~106Kpa | |||
Relative humidity | 10~90% (non-condensing) | |||
Operating pressure range | -50 ~ + 300 mmHg | |||
Sensitivity | 5.0μV/V/mmHg ±3% | |||
Nonlinearity and hysteresis | full-scale reading±1.5% | |||
Input impedance | 1200Ω ~3200Ω | |||
Zero pressure offset | -20mmHg~+20mmHg | |||
Thermal offset shift | ≤±0.3mmHg/°C | |||
Offset drift | After warm-up for 20 seconds, drift within 2 mmHg within 8 hours | |||
Thermal span shift | ≤±0.1%/°C | |||
Frequency response | Standard pressure set (48 "/ 12") is 40 Hz; Separate sensor > 200 Hz | |||
Defibrillator withstand | Defibrillation depends on the final connection of the equipment. | |||
Leakage current | Leakage current is dependent on the final connection of the equipment | |||
Overpressure load | -400~+4000mmHg | |||
Shock resistance | Withstand falling from one meter for three times | |||
Light sensitivity | When exposed to a 3400°K tungsten light, candle light at 3000 feet, it's less than 1 mmHg under rated voltage. | |||
Storage and transport environment requirements | - 20 ° C~ + 60 ° C, < 90%(non-condensing), no corrosive gas and indoor ventilation, and to avoid high temperature and cold. | |||
Contact with the human body | ≤168h | |||
Intra-system velocity | ||||
Flow | 2-5mL/h | |||
Intra-system refers to the velocity under 6.00 VDC and 25°C, unless there are additional instructions. | ||||
3. Other Models :
REF | Sensor Desription |
BIY-PB-01 | Single Type PVB(PB) Connector |
BIY-PB-02 | Dual Type PVB(PB) Connector |
BIY-PB-03 | Ternary Type PVB(PB) Connector |
4. Certificates
5. Delivery details:
1) Our production cycle:
Item will be shipped within 4-7 working days after we get your
Payment, We are always serious on the delivery time, all orders
will be checked by us carefully to make sure there is no delay on
the shipment.
2) Shipping Methods:
a).we usually send goods by DHL,Fedex,TNT,UPS, Tracking number will
be advised after delivery, all of express lead time is about 5-7
working days.
b). If order is big, we will suggest you use Air Freight or Sea
freight.
6. About Sample
1) if we have the product you need , we can send you the sample
free
2) if we have not the product you need, we advice you send us one
piece of sample,
We will check how to produce it for you .
