Wuhan Spico Machinery & Electronics Co., Ltd. |
Verified Suppliers
|
|
Firefighting System 400GPM @ 135PSI Skid Mounted Fire Pump With End
Suction Fire Pump Sets UL / NFPA20
Parameters:
HEAD | PUMP MODEL | SPEED | MAX SHAFT POWER | MOTOR DRIVER | DIESEL ENGINE DRIVER | ||||||||||
PSI | FEET | METER | RPM | HP | KW | MODEL | HP | KW | MODEL | HP | KW | MODEL(DE MAAS&FM) | HP | KW | |
135 | 311 | 95 | ESF65/26 (2.5"x2") | 2980 (50Hz) | 68 | 50.7 | T250M1-2 (IEC/TEFC) | 75 | 55 | NM4-105 | 86 | 64 | IF05AH-F | 81 | 60 |
FM Approved fire pump packages are produced using components
that have been subjected to rigorous tests to ensure that they will
perform when called upon during each certification program. Pump
tests map the pump flow versus discharge head characteristics
across the entire range of flows; suction lift tests evaluate the
pump’s ability to perform in less than perfect water supply
conditions; and hydrostatic pressure testing performed to assure
the pump casings can withstand fire sprinkler system pressures.
Diesel engine/electric motor driver tests evaluate the performance
of the engine/motor under extremely harsh test conditions, and also
the engine/motor ability to communicate with the fire pump
controller. This approach allows for reliable service from this
highly important piece of machinery.
The third main component of the fire pump package is the fire pump
controller. FM Approvals’ requirements for these products have been
developed to evaluate these complex devices under severe conditions
in order to provide the fire pump package with a reliable device
standing ready to act if the need arises. FM Approvals’
requirements have also addressed the mix-and-match capability
between diesel engines and controllers of years ago with a
standardized terminal strip so that communication across devices is
much easier to establish and maintain.
FM Approvals will audit the facilities of each manufacturer of the
entire fire pump system, ensuring adherence to our stringent
standards and production to the highest level of quality and
reliability on an ongoing basis. FM Approvals also monitors any
performance issues reported from the field and assists the user in
obtaining prompt, corrective actions.
Pump types:
End suction pump, Jockey pump, In-line pump
Configuration types:
1. Electric motor driven fire pump Sets
2. Diesel engine driven fire pump Sets
3. jockey pump Sets
Performance Ranges:
| Q: 100-750GPM | H:100-145PSI |
| Q: 100-750GPM | H:100-145PSI |
| Q:5-150L/S | H:0.40-1.6Mpa |
| Q: 100-2250GPM | H:60-230PSI |
Advantage:
Service:
1. Reply within 24 hours. |
2. High-quality products and the most reasonable price |
3. Data and chemical technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |