Active Member
|
[China]
Address: Xianhou County No. 368, Quan Yutong business Center 5F 501, Huli , Xiamen, China.
Contact name:Mark
Xiamen Spider Science and Technology Co., Ltd |
|
|
Wall Mouted 18000 BTU Split Air Conditioner For Home Use 1.5 TONS
Advantage
1) Rapid cooling, dehumidification effect is good.
2) Ultra-quiet operation, quiet and low-pitched.
3) Easy to install and overhaul.
4) Economical and practical, flexible to use.
optional feature
Cold catalyst filter: Formaldehyde removal filter, supply much
healthier, fresh air.
ECO mode: decreasing power consumption, saving cost in electricity
bills. Kanion is substantially more efficient in this than any
other brand.
Follow me & 3D Air Flow: High compatibility and convenience.
Kanion products can detect human presence and adjust the
temperature according to your location.
Self detection of refrigerant leakage: self diagnosis and
protection from unditected difections that might prove to demand a
costly maintenance.
Turbo: reach desired temperature vividly faster.
Bigger capacity compressors: Always use bigger / full capacity
compressors for our machines.
Parameters
Name | Auto Protection Non Inverter AC For Summer / Winter Sleep Mode Flexible To Use | ||
Power supply | Ph-V-Hz | 220-240V- 50Hz, 1Ph | |
Cooling | Capacity | Btu/h | 18000 |
Input | W | 1860 | |
Rated current | A | 8.2 | |
EER | W/W | 2.84 | |
Heating | Capacity | Btu/h | 18000 |
Input | W | 1700 | |
Rated current | A | 7.8 | |
COP | W/W | 3.10 | |
Max. input consumption | W | 2700 | |
Max. current | A | 12.3 | |
Starting current | A | 41 | |
Compressor | Model |
| PA200M2AS-4KU2 |
Type |
| ROTARY | |
Brand |
| GMCC | |
Capacity | Btu/h | 16975/17179 | |
Input | W | 1670/1795 | |
Rated current(RLA) | A | 7.85/8.15 | |
Locked rotor Amp(LRA) | A | 41 | |
Thermal protector |
| ----- | |
Thermal protector position |
| INTERNAL | |
Capacitor | uF | 45 | |
Refrigerant oil/oil charge | ml | ESTEL OIL VG74 · 620 | |
Indoor fan motor | Model |
| RPG45C |
Input | W | 72 | |
Capacitor | uF | 3.0 | |
Speed(Hi/Mi/Lo) | r/min | 1180 / 1100 / 900 | |
Indoor coil | a.Number of rows |
| 2 |
b.Tube pitch(a)x row pitch(b) | mm | 21x13.37 | |
c.Fin spacing | mm | 1.3 | |
d.Fin type (code) |
| Hydrophilic aluminium | |
e.Tube outside dia.and type | mm | Φ7,innergroove tube | |
f.Coil length x height x width | mm | 780x315x26.74 | |
g.Number of circuits |
| 5 | |
Indoor air flow (Hi/Mi/Lo) | m3/h | 1050/980/800 | |
Indoor noise level (Hi/Mi/Lo) | dB(A) | 48/46/39 | |
Indoor unit | Dimension(W*D*H) | mm | 1045x235x315 |
Packing (W*D*H) | mm | 1135x395x315 | |
Net/Gross weight | Kg | 12 / 15 | |
Outdoor fan motor | Model |
| YDK48-6H(A) |
Input | W | 110 | |
Capacitor | uF | 3.0 | |
Speed | r/min | 890 / -- / -- | |
Outdoor coil | a.Number of rows |
| 2 |
b.Tube pitch(a)x row pitch(b) | mm | 21x13.37 | |
c.Fin spacing | mm | 1.4 | |
d.Fin type (code) |
| Hydrophilic aluminium | |
e.Tube outside dia.and type | mm | Φ7,innergroove tube | |
f.Coil length x height x width | mm | 660x546x26.74 | |
g.Number of circuits |
| 3 | |
Outdoor noise level | dB(A) | 59 | |
Outdoor unit | Dimension(W*D*H) | mm | 760x285x590 |
Packing (W*D*H) | mm | 887x355x645 | |
Net/Gross weight | Kg | 35.5 / 38 | |
Refrigerant type | g | R410A/1280g | |
Design pressure | MPa | 4.2/1.5 | |
Refrigerant piping | Liquid side/ Gas side | mm(inch) | Φ6.35/Φ12.7(1/4"/1/2") |
Max. refrigerant pipe length | m | 25 | |
Max. difference in level | m | 10 | |
Connection wiring |
| 2.5(Optional) | |
Plug type |
| 2.5x3 | |
Thermostat type |
| Remote Control | |
Operation temperature | ℃ | 17-30 | |
Room temperature | Indoor(cooling/ heating) | ℃ | 17-32/0-30 |
Outdoor(cooling/heating) | ℃ | 18-43/-7-24 | |
Application area (Cooling Standard) | m2 | 24-35 | |
Qty’per 20’ /40’ /40'HQ |
| 78/166/190 | |
FAQ
Q1: Are you direct manufacturer or trading company?
A: We are a professional manufacturer over 15 years.
Q2: Can you provide sample?
A: Yes, we can provide sample but customer should pay cost of sample and freight charge.
Q3: How about the delivery time?
A: It depends on your quantity. Generally, it takes 30-35 days after receiving your deposit.
Q4: What are the payment terms?
A: We usually accept payment by L/C, D/A, D/P, T/T, Western Union, Money Gram, and Paypal.
Q5: Can we do our OEM logo?
A: Yes,we can do OEM logo for you.FOR FREE.You just provide LOGO design to us.
Q6: How do you ensure the quality products?
A: We are strictly focus on quality control.All goods are 100% inspected before shipping. we do at least 3 tests,including in-coming raw material test,sample test then bulk produce.
