Zhejiang Lisheng spring co.,ltd |
|
1. Item name: Wave springs
2. Material Sections: Round wire/Flat wire
3. Wire diameter: 0.15~50mm, according to specific requirement
4. Material: Carbon steel 1066/ 65/ 65MN 9260/ SUP6,SUP7/ 60SiCr7/ 60C2/ 60Si2Mn
Stainless steel304/S30400/SUS304/X5CrNi18-10/0Cr18Ni9/ 316/ S31600/SUS316/X5CrNi17.12.2/0Cr17Ni12Mo2 / 631/ S17700/ SUS631/ 1.4568/ 17-7PH
Nickel alloy/Nimonic alloy Inconel X-750/ NO7750/ 2.4669/ GH4145 / Inconel 718/ NO7718/ 2.4668/ GH4169
Gap and Overlap Type Wave Springs can be used in many application area. Especially for short trips and low-medium load of the occasion,they provide high reliability and accuracy.Nested wave springs feature is very large loads can be supported with a small installation space , its can be replaced Disc spring in many applications.
【Single turn/Nested Wave spring theoretical analysis】
Item Material | t | b | O.D. | W | N | FH | WH | K | L | Os | I.D. | O.D.s> | Wc | Lc |
mm | mm | mm | waves | coils | mm | mm | N/mm | N | N/m m2 | mm | mm | cycles | ||
AISI 1070~1090 | 0.24 | 1.7 | 22 | 3 | 2 | 3.75 | 2.33 | 28.5518 | 41 | 1100 | 18.6 | 23.08 | Linear | 30K~50K |
AISI 1060~1075 | 0.24 | 1.7 | 22 | 3 | 1 | 3.75 | 2.33 | 14.2579 | 20 | 1100 | 18.6 | 23.26 | Linear | 30K~50K |
AISI 631 | 0.24 | 1.7 | 22 | 3 | 1 | 3.75 | 2.33 | 13.5961 | 19 | 1048 | 18.6 | 23.26 | Linear | Under 30K |
Input parameters section | Results section |
t : Material thickness | FH : free height | Os : operating stress | UW : unit weight |
b : Material width | WH : working height | I.D : Inner diameter | |
O.D. : Outer diameter | Es : End shims | O.D.s : outer diameter at solid height | |
W : Number of waves(per turn) | K : spring rate(stiffness) | Wc : Working curve | |
N : Number of turns | L : working load | Lc : Life cycles prediction |