2 Turn Laminar Sealing Rings Combined for shafts Series FK6 ISKD
for shafts
Application "FK6 ISKD" Inside clamping combined double rings (3
rings = 1 set)
Double wound laminar sealing rings "FK6 ISKD" are used as a grease
seal for roller and plain bearings and they protect, if greased,
against grease leakage as well as against dust, dirt and splash
water ingress, especially if the sealing requirements are high. Due
to the increased labyrinth effect, the sealing effect is optimized
by the additional sealing of the groove base diameter.
The "FK6 ASD" or "FK6 ASKD" assemblies are normally preferred over
the "FK6 ISD" or "FK6 ISKD" assemblies due to their easier
installation into the grooves. Depending on the applications or the
technical requirements, the ring carriers can be manufactured from
steel, cast iron, light alloy or plastics.
0.625 | - | 1.249 | 0.072 | 0.119 | 0.055 | 0.021 | 0.134 | -0.134 |
1.25 | - | 1.499 | 0.072 | 0.119 | 0.065 | 0.021 | 0.154 | -0.154 |
1.5 | - | 1.749 | 0.084 | 0.139 | 0.078 | 0.025 | 0.18 | -0.18 |
1.75 | - | 2.249 | 0.102 | 0.17 | 0.095 | 0.031 | 0.214 | -0.214 |
2.25 | - | 2.749 | 0.102 | 0.17 | 0.113 | 0.031 | 0.25 | -0.25 |
2.75 | - | 2.999 | 0.102 | 0.17 | 0.123 | 0.031 | 0.27 | -0.27 |
3 | - | 3.249 | 0.102 | 0.17 | 0.128 | 0.031 | 0.28 | -0.28 |
3.25 | - | 3.499 | 0.102 | 0.17 | 0.138 | 0.031 | 0.3 | -0.3 |
3.5 | - | 3.999 | 0.102 | 0.17 | 0.158 | 0.031 | 0.34 | -0.34 |
4 | - | 4.499 | 0.102 | 0.17 | 0.168 | 0.031 | 0.36 | -0.36 |
4.5 | - | 4.999 | 0.131 | 0.215 | 0.188 | 0.039 | 0.408 | -0.408 |
5 | - | 5.499 | 0.131 | 0.215 | 0.2 | 0.039 | 0.432 | -0.432 |
5.5 | - | 6.249 | 0.158 | 0.254 | 0.225 | 0.046 | 0.49 | -0.49 |
6.25 | - | 7.749 | 0.187 | 0.301 | 0.25 | 0.055 | 0.54 | -0.54 |
7.75 | - | 9.999 | 0.187 | 0.301 | 0.312 | 0.055 | 0.702 | -0.702 |
10 | - | 12.499 | 0.217 | 0.346 | 0.35 | 0.063 | 0.778 | -0.778 |
12.5 | - | 14.999 | 0.217 | 0.346 | 0.375 | 0.063 | 0.828 | -0.828 |
15 | - | 19.999 | 0.307 | 0.496 | 0.437 | 0.093 | 0.952 | -0.952 |
20 | - | 24.999 | 0.31 | 0.504 | 0.5 | 0.093 | 1.158 | -1.158 |
25 | - | 29.999 | 0.31 | 0.504 | 0.567 | 0.093 | 1.292 | -1.292 |
30 | - | 50 | 0.31 | 0.504 | 0.75 | 0.093 | 1.658 | -1.658 |