Single Turn Laminar Sealing Rings Combined for shafts Series FK3 IS
for shafts
Application "FK3 IS" Inside clamping single rings (3 rings = 1 set)
Single wound laminar sealing rings "FK3 IS" are used as a grease
seal for roller and plain bearings and they protect, if greased,
against dust entry and ambient moisture. The combined ring sets
"FK3 ISK" (additional sealing of the groove base diameter) optimize
the sealing effect due to the increased labyrinth effect.
The "FK3 AS" or "FK3 ASK" assemblies are normally preferred over
the "FK3 IS" or "FK3 ISK" assemblies due to their easier
installation into the grooves. Depending on the applications or the
technical requirements, the ring carriers can be manufactured from
steel, cast iron, light alloy or plastics.
0.625 | - | 1.249 | 0.072 | 0.119 | 0.055 | 0.021 | 0.134 | -0.134 |
1.25 | - | 1.499 | 0.072 | 0.119 | 0.065 | 0.021 | 0.154 | -0.154 |
1.5 | - | 1.749 | 0.084 | 0.139 | 0.078 | 0.025 | 0.18 | -0.18 |
1.75 | - | 2.249 | 0.102 | 0.17 | 0.095 | 0.031 | 0.214 | -0.214 |
2.25 | - | 2.749 | 0.102 | 0.17 | 0.113 | 0.031 | 0.25 | -0.25 |
2.75 | - | 2.999 | 0.102 | 0.17 | 0.123 | 0.031 | 0.27 | -0.27 |
3 | - | 3.249 | 0.102 | 0.17 | 0.128 | 0.031 | 0.28 | -0.28 |
3.25 | - | 3.499 | 0.102 | 0.17 | 0.138 | 0.031 | 0.3 | -0.3 |
3.5 | - | 3.999 | 0.102 | 0.17 | 0.158 | 0.031 | 0.34 | -0.34 |
4 | - | 4.499 | 0.102 | 0.17 | 0.168 | 0.031 | 0.36 | -0.36 |
4.5 | - | 4.999 | 0.131 | 0.215 | 0.188 | 0.039 | 0.408 | -0.408 |
5 | - | 5.499 | 0.131 | 0.215 | 0.2 | 0.039 | 0.432 | -0.432 |
5.5 | - | 6.249 | 0.158 | 0.254 | 0.225 | 0.046 | 0.49 | -0.49 |
6.25 | - | 7.749 | 0.187 | 0.301 | 0.25 | 0.055 | 0.54 | -0.54 |
7.75 | - | 9.999 | 0.187 | 0.301 | 0.312 | 0.055 | 0.702 | -0.702 |
10 | - | 12.499 | 0.217 | 0.346 | 0.35 | 0.063 | 0.778 | -0.778 |
12.5 | - | 14.999 | 0.217 | 0.346 | 0.375 | 0.063 | 0.828 | -0.828 |
15 | - | 19.999 | 0.307 | 0.496 | 0.437 | 0.093 | 0.952 | -0.952 |
20 | - | 24.999 | 0.31 | 0.504 | 0.5 | 0.093 | 1.158 | -1.158 |
25 | - | 29.999 | 0.31 | 0.504 | 0.567 | 0.093 | 1.292 | -1.292 |
30 | - | 50 | 0.31 | 0.504 | 0.75 | 0.093 | 1.658 | -1.658 |