Active Member
|
[China]
Address: Room 805,building 7,No.67,Chaoyang Rd,Chaoyang District,Beijing,100123,China
Contact name:Simon
Beijing Nubway S & T Development Co, Ltd |
|
Treatment principle:
diode laser hair removal use 808-nm diode laser technology, the gold standard in laser hair removal, energy penetrates deep into the dermis where the hair follicle is located, delivering high average power. Diode laser with TEC assisted by sapphire contact cooling in hand piece provides safe and effective reduction of pigmented hair for all skin types.
| Laser type | Semiconductor laser |
| wavelength | 808 nm |
| Output Mode | pulse output |
| Control Method | Touch control |
| Screen Size | 10.4 Inch |
| Energy density | 20~70J/cm2 (Deviation≤±2%) |
| Pulse width range | 1-400ms |
| Spot size | 12*20mm |
| Frequency | 1-10HZ |
| Light spot surface temperature | 0-30°C |
| Cooling System | Semiconductor+built-in water+Air Cooling triple cooling systems |
| Dimension | 500×425×1120mm |
| Net weight | 60kg |
| Fuse specification | Ø5×2510A |
| Input Power | 1800W |
| Power | AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ |
Handlepiece:
*Germany original imported medical use pipe more durable , more professional .
*Spot size=12mm*20mm=2.4cm² , total energy output 24J~168J , average energy 10~70J/cm²
*Shot time warranty (max energy,max frenquency): 20 millions
10 germany "dilars" diode laser bar inside . Total output 600w , 60w for each laser bar .
Water and wind cooling system:
Medical use 60 meter level high pressure magnetic drive pump , peltier elements 40*40mm double deck cooler , 4 big power fan with copper condensor , make sure the handle and the machine 's best cooling .
Safety system:
Automatic detection : Water flow voclocity , flow capacity ,working temperature . Error display when meet unnormal situation . Machine works stable and safe .
Treatment scope:
Remove the unwanted hair on all parts of the body, such as hairline, lip hair, whiskers, armpit hair, body hair, bikini hair or any other unwanted hair
Hair removal process?
1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to ‘standby’ .
4. Put cooling gel on treatment area about 2mm.
5. Wear protect goggles for patient and operator.
6. Shot the treatment area, let the crystal tip to touch cooling gel, You are permitted to have 1/3 overlapping on treatment area.
7. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients feel warm or hot, you may put ice bag on treatment area until heat disappear.
Before&After:
