- Prepare the tools for installing the equipment (percussion drill,
expansion screw, adjustable wrench, a set of Allen wrench,
screwdriver, electrical tape, wire cutter, multimeter, network
cable tester, etc.);
- Channel number composition, channel width, working method, and then
make overall planning at the determined installation location;
- Determine the location of the installation equipment and arrange
the equipment in order: A1-A2-A3 is the entrance side, and the
B1-B2-B3 exit is the other side. After determining the channel
installation location, excavate on the side of the channel A Put
two PVC pipes with appropriate pipe diameters into the wiring
trough, and pass the AC220V power cord (RVV3*2.0), network cable,
24V power cord (RVV2*0.5), CAN communication line (RVVP2*0.3)
through each channel Into the PVC line pipe;
Note: The AC220V and DC24V power cords are passed through the PVC
pipe separately, and the rest of the network cables and CAN
communication lines are passed through another PVC pipe; a single
core requires one network cable, and a dual core requires two
network cables (1, power cord 2, CAN Communication line 24V power
line 3, network cable)
4. Mark the expansion screw installation holes at the bottom of the
turnstile, drill the M14 hole with an impact drill, and pre-embed
the M12 expansion screw;
5. Move each chassis to the corresponding installation position,
align the expansion screws, check the alignment of each channel
gate and lock the expansion screws;
6. The main and auxiliary machine connecting lines of the gate: one
channel has 1 main board and 1 auxiliary board, the main machine
and the auxiliary machine are synchronized through the 24V power
line and the CAN communication line. When there are dual cores in
the channel, the gate should be in accordance with entrance A1 -A3,
exits B1-B3 are placed in sequence, and cannot be rotated 180
degrees for installation;
FAQ
Q1: Do you have English version system?
A: Yes, we can provide English version system. Also you can use
your own system as well.
Q2: Does the equipement include control board?
A: Yes, it is with control board. But if need our system to
management, need to order extra channel management control board.
Q3: Can we connect your access control system with our system?
A: Yes, we provide SDK and Software development service with
connection port.
Q4: How can we install the turnstiles/barrier gates? Is it easy?
A:Yes, it's easy to install, we have done most of the jobs before
sending our products. You just need fix the gates with screws, and
connect power supply cables and internet cables.Also we provide one
sheet of specific manual specification in the package.
Q5: What is your company’s strength?
A: We are the top 3 manufacturer in turnstile field in China. And
we are listed company with famous brand in China. We have more than
400 employees, a R&D group with 160 people, 15-person
customized team, 18 offices, 9 agents and more than 20 distributors
all around China.
Q6: How do you do after-sale service?
A: We provide life-time technology support on line, by emails,
video, phone etc. We have engineer speaking English, convenient to
communicate with you directly.
Q7:How about the lead time?
Normally we have raw material in stock for the hot sale models of
standard products. Regular products need 5-7 working days. The
customized products need 15-20 working days.
Q8: How many years of warranty?
A: We provide 1 year warranty for our products.