Active Member
|
[China]
Address: 2nd Floor Building D Huafeng International Robot Industrial Park, Baoan District Shenzhen
Contact name:Rita Liu
Shenzhen Sopto Technology Co., Ltd |
|
|
1 U Standalone 8 PON Ports 10G Epon Olt Optical Network Terminal For FTTH
1 U Standalone 8PON EPON OLT Optical Network Terminal for FTTH
SPO-ES8444 series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.
The OLT can use for“Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high performance products.
SPO-ES8444 series provides 1 USB interface, 4GE(copper) and 4GE optical interface, 4*10Gb uplink interface, and 8 EPON ports for downstream. It can support 512 ONU under 1:64 splitter ratio
| Item | SPO-ES8444 | |
| Chassis | Rack | 1U 19 inch standard box |
| Uplink Port | QTY | 12 |
| Copper | 10/100/1000M auto-negotiable,RJ45:4pcs | |
| Optical interface | 4 GE | |
| 10Gb uplink interface | 4*10Gb | |
| PON Port | QTY | 8 |
| Physical Interface | SFP Slots | |
| SFP Type | 1000BASE-PX20/20+/20++ | |
| Max splitting ratio | 1:64 | |
| USB Port | QTY | 1 |
| Connector Type | Type-C | |
| Management Ports | 1*100BASE－TX outband port; 1 CONSOLE port | |
PON Port Specification(Apply to SOPTO module) | Transmission Distance | 20KM |
| PON port speed | Symmetrical 1.25Gbps | |
| Wavelength | 1490nm TX,1310nm RX | |
| Connector | SC/PC | |
| Fiber Type | 9/125μm SMF | |
| TX Power | PX20: +2.5～+7dBm PX20+: +3.5～+7dBm PX20++: +5～+8dBm | |
| Rx Sensitivity | -30dBm | |
| Saturation Optical Power | -6dBm | |
| Management Mode | SNMP, Telnet, CLI management mode. | |
| Management Function | Fan Group Detecting Port Status monitoring and configuration management; Layer-2 switch configuration such as Vlan, Trunk ,RSTP,IGMP ,QOS, etc; EPON management function: DBA ,ONU authorization, ACL ,QOS ,etc; Online ONU configuration and management User management Alarm management | |
| Layer-two Switch | Support port VLan and protocol Vlan Support Vlan tag/Untag ,vlan transparent transmission; Support 4096 VLAN Support 802.3dd trunk RSTP QOS based on port ,VID,TOS and MAC address IGMP Snooping 802.x flow control Port stability statistic and monitoring | |
EPON Function | Support port-based rate limitation and bandwidth control; In compliant with IEEE802.3ah Standard Up to 20KM transmission Distance Support data encryption, group broadcasting, port Vlan separation, RSTP, etc. Support Dynamic Bandwidth Allocation (DBA) Support ONU auto-discovery/Link detection/remote upgrade of software; Support VLAN division and user separation to avoid broadcast storm; Support various LLID configuration and single LLID configuration . Different user and different service could provide different QoS by means of different LLID channels. Support power-off alarm function ,easy for link problem detection Support broadcasting storm resistance function Support port isolation between different ports Support ACL and SNMP to configure data packet filter flexibly Specialized design for system breakdown prevention to maintain stable system Support dynamic distance calculation on EMS online Support RSTP,IGMP Proxy | |
Layer-three Route | Support static unicast Support static multicast Support RIP routing protocol Support dynamic multicast protocol with active source | |
| Backplane Bandwidth | 112G | |
| Dimension | 440*300*44(mm*mm*mm) | |
| Weight | 5.5kg | |
Power Supply | 220VAC | AC: 100V～240V,47/63Hz |
| -48DC | DC:-36V～-72V | |
| Power Consumption | 58W | |
Operating Environment | Working Temperature | 0～50℃ |
| Storage Temperature | -40～85℃ | |
| Relative Humidity | 5～90%(non-condensing) | |
Application
GPON / EPON OLT Network Applications
Ordering Information
| Product | Model | QTY | Unit | Configuration | Notes |
| 1U EPON OLT | SPO-ES8444 | 1 | Set | 1U standalone GPON OLT with 1 USB interface, 8 PON ports, 4 uplink gigabit optical ports,4 uplink UTP ports, 4 uplink 10-gigabit optical ports and power supply of 220VAC / -48VDC, support dual power redundancy configuration | without SFP modules |
| Uplink SFP | SPT-P131G-20D | 1～4 | PC | Optional; A demonstration configuration is 20KM dual fiber . Optical Transceiver 1.25G SFP 1310nm SM 20KM DDM | When select the optical ports as uplink, it would be taken into consideration. |
OLT PON SFP
| SPT-ET4311-SE2AD | 1～8
| PC | Optical Transceiver EPON OLT SFP 1490nm(Tx)/1310nm(Rx),1.25G(Tx)/ 1.25G (Rx),SC,SM, PX20+ DDM | The recommended configuration is 8pcs; at least 1pc ;8 pcs at most.
|
| SPT-ET4311-SE2CD | Optical Transceiver EPON OLT SFP 1490nm(Tx)/1310nm(Rx), 1.25G (Tx)/ 1.25G (Rx),SC,SM, PX20++ DDM | ||||
| SPT-ET4311-SE2BD | Optical Transceiver EPON OLT SFP 1490nm(Tx)/1310nm(Rx), 1.25G (Tx)/ 1.25G (Rx),SC,SM, PX20 DDM | ||||
| Gigabit Ethernet SFP | SPT-P85TG-SR | 1～4 | PC | Optical Transceiver 10G SFP+ 850nm MM 300M DDM | When select the 10Gb uplink ports, it would be taken into consideration. |
| SPT-P13TG-LR | Optical Transceiver 10G SFP+ 1310nm SM 10KM DDM |
