Active Member
|
[China]
Address: A238,Qixing Business Center, No.15, Wangyuan Road, Huangcun, Tianhe District, Guangzho, China
Contact name:Vivi
Guangzhou Caizhiheng Equipment Co., Ltd |
|
|
Electric Hot Air Plastic Welding Machine , High Frequency PVC Banner Welder
Function Parameter Guideline
Rated voltage | AC110-240V | Frequency | 50-60Hz |
Power | 1000-3000W | Temperature scope | 0-500°C |
Speed scope | 1-15m/min | Sepcification | 41*25*20cm |
Weight | 15-20Kg | Splicing width | 2-5cm |
1. The flex banner welder use hot air to join disjunct poster
banner without glue.
2. Work temperature, move speed, and wind speed are adjustable.
3. Constructed simple, easy to maintain, The volume is small, the
whole weight only 15 kilogram,
4. Operation is also simple, needs not much guide to operate.
5. Its welder nozzel have a sensor can make the ture temperature
accuratelly.
Specification parameter
1. Alternant electric voltage: 220V/50Hz
2. Upper limit power: 2000W, average 800W
3. Adjustable work temperature: 50-600
4. Adjustable: self-move speed 0.8-15M/per minute;
5. Adjustable: wind speed 1-6 grades
6. Whole weight: 15-20kg
7. Splicing width: 2-5cm.
Repair and maintenance
Hot air poster pvc banner welding machine portable
Use for weld PVC, PE and other material can be hot melt, like flex, PVC cloth etc.
| Fault | Remedy |
| Temperature is garbled, the actual temperature does not show | Check the temperature probe whether the grounding be kept vacant nozzle.View probe is broken, repair the sensor line. |
| Temperature not rise | Check whether the fuse heating parts, heating parts replacement if the fuse. |
| No power | Check the wiring is solid or not, protective tube burst. |
| Scratch the screen | Adjust the nozzle and parallel ground,keep the right lateral of wind mouth form the ground 1mm |
| Speed out of control | Replace potentiometer (black knob) |
| Welding is not strong | Rise temperature degree or slow the speed,Adjust the nozzle parallel with the ground. |
Hot air welding machine
1. It is the professional designs for welding flex banner, PE, PVC, plastic cloth, printing cloth and the painting connection of advertisement. Material.
2. Adopted switzerland heating system and digital function for
temperature showing.
3. Nowadays, we add more new functions, such as laser guiding unit and portable walking unit for choice
The intelligent banner welder
1. Application field Use for weld PVC, PE and other material can be
hot melt, like flex, PVC cloth etc.
2. Main technical details Rated voltage: AC110-240V Frequency:
50-60HZ Power: 1000-3000W Temperature scope: 0-500°C Speed scope:
1-15m/min Dimension: 41*25*20cm Weight: 15kg Splicing width: 2-5cm
3. Advantage No need glue, use hot air to weld; Temperature, speed,
fan motor speed are adjustable; Welder nozzle has a sensor, can
make the true temperature accurately; High welding quality.
Advantage
No need glue, use hot air to weld;
Temperature, speed, fan motor speed are adjustable;
Welder nozzle has a sensor, can make the true temperature accurately;
High welding quality.
Operation procedures
1. Turn on the power, according to quality and thickness of the PVC banner, consider the ground circumstance, set the proper termperature and speed, adjust the suitable hot-air blowing rate, wait for machine hot up around 2 minutes.
2. Bring up the machine, place the rubber wheel at the end of the overlap edge.
3. Turn the handle to left down, insert the welder nozzle into the gap of two overlap pieces, then the machine will moving and seaming automatic.
Product Photo
