Active Member
|
[China]
Address: A238,Qixing Business Center, No.15, Wangyuan Road, Huangcun, Tianhe District, Guangzho, China
Contact name:Vivi
Guangzhou Caizhiheng Equipment Co., Ltd |
|
|
Xaar Konica Ultrasonic Printhead Cleaning Machine Automatic 110V / 220V
Function Parameter Guideline
| Product Name | Ultrasonic Printhead Cleaner |
| Function | Automatic |
| Condition | Brand New |
| Brand | JYY |
Digital Ultrasonic cleaner Features:
Product Description
The product lines generated by high-frequency ultrasound sources HF
shocks, the use of ultrasound shock, the rapid extension of the
surface dirt.Power : 30W Frequency : 42KHZ quiet, low noise.3
minutes automatic machines suitable for cleansing : printer nozzle,
glasses, earrings, necklaces, etc.
Ultrasonic cleaning is based on the cavitation effect caused by
high frequency ultrasonic wave vibration signal in the fluid.
Microscopic bubbles are formed, and they implode violently causing
the cavitation which create an intense scrubbing action on the
surface of the item being cleaned. The bubbles are small enough to
penetrate microscopic crevices, cleaning them thoroughly and
consistently.
Ultrasonic cleaning is extremely effective at removing dirt and
grime which would normally require tedious manual cleaning by hand.
It has been used to clean a wide variety of instruments and
mechanical parts such as carburetors, returning them to almost
“like new” condition without damage to delicate parts.
Feature:
1. Best Quality 110v/220v 35w Ultrasonic Epson Printhead Cleaning
Machine for head cleaning use.
2. 100% brand new with good quality
3. Suitable for all kinds of printhead
Tech Data:
| Product Name | Print head Cleaning Machine | Power (W) | 250 |
| Ultrasonic Power | 2500W | Ultrasonic Frequency | 40KHZ |
| Heating Power | 120W | Cleaning Type | Manual |
| Capcity | 0.6L | Voltage | 110V, 220V |
| Certifiaction | CE, Rohs | Ultrasonic Direction | ultrasonice direction |
| Weight | 6.5KG | Dimension(L*W*H) | 35*29*34.5cm |
| Fuel | Electric | Condition | New |
| Stock | in stock | MOQ | 1 Set |
User Guide
1. Put cleaning fluid in cleaning fluid tank
2. Adjust the print head shelf to suit for the print head need
cleaning, then put the print head in shelf
3. Connect the pipe with print head ink connector
4. Plug power cable, press red button, use ultrasonice to clean it
for some seconds at first
5. Press the corresponding green button, machine will fill fluid
into print head, use pressure cleaning. That moment check the
cleaning fluid come out from print head is soigne.
6. If the fluid is dirty, change some new fluid clean it again.
When the fluid come out is clean and soigne, then cleaning is
finished.
Product Photo
