Active Member
|
[China]
Address: 1012-1 Mall, Huaren street, Tianyuan District, Zhuzhou City, Hunan province, China Zip code: 412000
Contact name:Emily
Zhuzhou Grewin Tungsten Carbide Tools Co., Ltd |
|
|
HRC65 4Flutes Flat Solid carbide end mils
| Materials | Solid Carbide |
| Brand | GREWIN |
| Coating | Copper coating |
| Flute | 4 flutes |
| Hardness | HRC66 |
| Spiral Angle | 35° |
| Materials to be cut | 45# steel, cast lron, tool steel and mould steel within HRC66 |
| Machine to be used | CNC machining centers, engraving machines and other high-speed CNC
millina machines |
Features
1. GOOD WEA R RESISTANCE, LONG WORKING LIFE, NANO COATING
Made with Anka machine tools and German technology, it can perform finishing and semi-finishing on heat-treated materials below 55 degrees, enhance tool life, reduce the number of roundabouts, and provide machine tool operation.
2. BIG DIAMETER DESIGN , SHARP CHIP REMOVAL
The unique helix angle is ground by first-class precision machine tools. The large core diameter design enhances rigidity and shock resistance .The large chip removal space is not easy to accumulate chips, and is not easy to break. It is sharp and wear-resistant, cutting smoothly, and improving milling efficiency.
3. WITH PASSIVATION TREATMENT, DURABLE AND ANTI-CORROSION
Imported passivation equipment, finely densified sand, increases the corrosion resistance and wear resistance of the end mill. Good grinding makes the cutting edge without chips. It can Extended the working life.
Sharp Cutting Edge
Improve the effective
Hard and long working life
1. Chemical Composition: 10%-12%Co-WC,100% raw material.
2. Physical and Machinal properties: Density: 14.40-14.65g/cm3
Hardness: HRA91.8-92.5 TRS> 3600N/mm2, Helix angle 30°-45 °.
3, Diameter of cutting edge 0.2-0.9 mm; 1-20 mm
4, Organizational Structure: WC mean grain size: 0.4-0.6um
5. Corresponds to International Standards: K20-K30, K20-K40
6, Suitable for: Machining of cast iron, nonferrous alloy,
nonferrous metals, fireproof alloy, Titanium alloy, alloy steel,
carbon steel and other non-metallic. It has suitable for finishing
processing the grooves and side. Meanwhile, it can be processing in high speed and high efficiency
which the material HRC>60
Introduction of the carbide materials of the End mill
| Carbide Grade | Technical Details of tungsten carbide rod |
| 10U | Co:10% WC 89% rare element: 1% HRA: 90.5°Grain Size: 0.75um |
| 12U | Co:12% WC 85% rare element: 3% HRA: 92.5°Grain Size: 0.4um |
| K40 | Co:12% WC 84% rare element: 4% HRA: 93°Grain Size: 0.4um |
| K44 | Co:12% WC 84% rare element: 4% HRA: 93.5°Grain Size: 0.4um |
The materials to be cut
| Carbide Grade | HRC of End mill | Materials to be cut |
| 10U | HRC45-50 | For cutting the materials under HRC35 |
| 12U | HRC55-58 | For cutting the materials under HRC50 |
| K40 | HRC60-62 | For cutting the materials under HRC55 |
| K44 | HRC65-70 | For cutting the materials under HRC63 |
Corresponding Coating
| Carbide Grade | HRC of End mill | Corresponding Coating |
| 10U | HRC45-50 | AlTiN |
| 12U | HRC55-58 | TiAlN |
| K40 | HRC60-62 | TiSlN |
| K44 | HRC65-70 | Nano |
Introduction of carbide materials of the End mill
| AlTiN | TiAlN | TiSlN | Nano | |
| Hardness(HV) | 3200 | 2800 | 3600 | 42(GPA) |
| Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
| Oxidation Temp(°) | 900 | 800 | 1000 | 1200 |
| Friction Coefficient | 0.3 | 0.3 | 0.45 | 0.4 |
| Color | Black | Violet | Copper | Blue |
INSTRUCTIONS FOR USE
01. Before using the tool, please measure the tool deflection. If
the tool deflection accuracy exceeds 0.01mm, please correct it
before cutting.
02. The shorter the length of the end mill sticking out of the
chuck, the better.If the end mill sticks out for a long time, it is
necessary to reduce the rotational speed, feed rate or cutting
amount.
03. During cutting, if abnormal vibration or sound occurs, please
reduce the cutting speed and the cutting feed rate until the
situation improves.
04. The steel cooling is preferably spray and air jet, which can
effectively improve the use effect of the milling cutter.
WARMLY TIPS
01 Properly reducing the cutting speed and feed rate can prolong
the trial life of the milling cutter.
02 When working, it is necessary to add cutting fluid to protect
the cutting edge, which makes the cutting smoother.
03 When there is an oxide film or other hardened layer remaining on
the surface of the work-piece, it can be removed by reversible
milling.
