Active Member
|
[China]
Address: Huixin PLaza, NO.8 Beichen East Road, Chaoyang District, Beijing,China
Contact name:Kevin
Beijing MITSCN Co., Ltd. |
|
|
• Pure sine wave output
• 3 Steps charging
• Overload and short-circuit protection
• Set charging voltage/charging current
• Battery low voltage shutdown point can be set to 10 / 10.5 / 11 /
11.5V
• Power-save mode
• Set utility priority/battery priority
• Set utility input wide/narrow range
• Inverter voltage can be set to 110V/115V/120V or 220V/230V/240V
• Inverter frequency can be set to 50Hz/60Hz
• Set utility charging on/off switch
• Inbuilt with 60A MPPT Solar Charge Controller
• Acid or Lithium Select
• WiFi port (optional)
PV3000 VPM series is very economical pure sine wave solar inverter,
inbuilt with 60A MPPT Charger and AC Charger from 20A to 60A;
Solar/AC priority
is configurable, when setting solar priority, solar will charge
batteries as first priority, and AC can also charge batteries when
solar charger current is too
lower, in this way system charge is optimazed best. It enables
inverter to operate with all kinds of home appliances.
| MODEL | PV30-1K VPM | PV30-2K VPM | |||
| Default Battery System Voltage | 12VDC | 24VDC | 12VDC | 24VDC | |
| Inverter Output | Rated Power | 1000VA | 2000VA | ||
| Surge Power | 3000VA | 6000VA | |||
| Capable Of Starting Electric Motor | 1HP | 1HP | |||
| Waveform | Pure sine wave /same as input(bypass mode) | ||||
| Nominal Output Voltage RMS | 110V /115V / 120V / 220V / 230V / 240VAC (±10% RMS) | ||||
| Output Frequency | 50Hz / 60Hz ±0.3 | ||||
| Inverter Efficency(Peak) | >88% | ||||
| Line Mode Efficiency | >95% | ||||
| Power factor | 0.7 | ||||
| Typical Transfer Time | 10ms(max) | ||||
| AC Input | Voltage | 230VAC±5% | |||
| Selectable Voltage Range | 96~132VAC 155~280VAC(For personal computers) | ||||
| Frequency Range | 50Hz / 60Hz (Auto sensing) | ||||
| BATTERY | Minimum Start Voltage | (10V / 10.5V / 11V / 11.5V )+0.5V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) | |||
| Low Battery Alarm | (10V / 10.5V / 11V / 11.5V )+0.5V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) | ||||
| Low Battery Cut Of | (10V / 10.5V / 11V / 11.5V )+0.5V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) | ||||
| High Voltage Alarm | (13.8-14.5V)+1V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) | ||||
| High Battery Voltage Recover | (13.8-14.5V)+1V for 12VDC mode (*2 for 24VDC, *4 for 48VDC) | ||||
| Idie Consumption-Search Mode | Load ≤50±20W(120V)/100±20W(220V) | ||||
| CHARGER | Output Voltage | Depends on battery type | |||
| Charge AC Input Breaker Rating (120V/230V) | 1K/12A | 2K/30A | |||
| 1-1.5K/10A | 2-3K/30A | ||||
| Overcharge Protection S.D. | 15.7VDC for 12VDC mode (*2 for 24VDC mode) | ||||
| Maximum Charge Current | 30A | 20A | 60A | 30A | |
| BYPASS & PROTECTION | Input Voltage Waveform | Sine wave (grid or generator) | |||
| Nominal Input Frequency | 50Hz or 60Hz | ||||
| Overload Protection (SMPS Load) | Circuit breaker | ||||
| Output Short Circuit Protection | Circuit breaker | ||||
| AC Input Breaker | 1-3K/30A | ||||
| SOLAR CHARGER | Maximum PV Array Open Circuit Voltage | 12V:75VDC; 24V:100VDC | |||
| Maximum PV Charge Current | 60A | ||||
| DC Voltage | 12V / 24V auto work | ||||
| Maximum PV Array Power | 1000W | 2000W | 1000W | 2000W | |
| MPPT Range @ Operating Voltage | 12V: 16~75VDC; 24V: 32-100VDC | ||||
| Standby Power Consumption | <2W | ||||
| MECHANICAL SPECIFICATIONS | Machine Dimensions(W*H*D)(mm) | 302.8*460*199.8mm 322*486*134 309*505*147 309*505*147 | |||
| Package Dimensions(W*H*D)(mm) | Shipping Dimensions (W*H*D) 400*319*615mm 426*560*260.5 375*655*269 375*655*269 | ||||
| Net Weight(kg) | 16.5 | 21.1 | 20 | ||
| Gross Weight(kg) | 19.3 | 24.1 | 22.8 | ||
| OTHER | Standard Warranty | 1year | |||
| Audible Noise | 60dB MAX | ||||
| Display | LED+LCD | ||||
| Operating Temperature | 0°C~40°C | ||||
| Storage Temperature | -15°C -60°C | ||||
