|
[China]
Trade Verify
Address: Floor 14th, Hui-Jing-Yuan Science & Technology Innovation Park, #531 Nan'pu Road, Shajing, Bao'an District, Shenzhen, P.R.C.
Contact name:Jessie Shi
Hynall Intelligent Control Co. Ltd |
|
Verified Suppliers
|
|
|
Model name: HNS153DL Independent DALI dimming motion sensor
This model is a intelligent motion sensor to upgrade your project, and independent DALI broadcast will have soft dimming curve. Special design for outdoor lighting, if you do not have 12V aux. power, HND120 will be a good choice for you.
Advantage:
1. 5.8GHz frequency module, more stability.
2. Function: DALI dimming and daylight monitoring function by remote control setting
3. If you do not want the sensor function, you just need to easily remove the sensor head
and put the cover cap on, the fixture becomes standard non-sensor control fixture.
4. Memory function with one button operation, easy operation
5. Customized service: Yes
Parameters:
Input voltage: 12V-24V DC
Input current: ≥30mA.
Detection range: max. 16~18m in diameter. Mounting height: max.12m.
RoHS compliant. | Size: 50mm in diameter only, small and easy enough to be used built-in.
Intelligent photocell to measure and differentiate natural light from LED light even when used built-in.
User friendly and easy setting for IR remote commissioning. |
Size:
Settings: One-key memory commissioning
Step 1: Long press“ Start” button for 2s till green LED
| Step 2:
Press“ Memory” button to memorize all settings
Green LED will flicker ONCE to indicate the operation success.
|
| Step 3: Press“ Apply” button to copy the same settings to other sensors, point the remote control to the receiving sensor for min. 2s. Red LED will flicker to indicate the operation success, the receiving sensor will buzz also to indicate success receival. | e.g., setting detection range 50%, daylight threshold 200lux,
hold-time 30s, dim off 1h, dim level 10%, the steps should be: 1. press“ start” button for 2s, choose“ 50%”,“ 200lux”, “ 30s”,“ 1h”,“ 10%” function zone button. 2. press“ memory” button. 3. press“ apply” to other sensors, then all of them will share the same settings. |
