TUV&CE Certified Half Cell Mono Solar Panel 550W With 182mm Solar Cell

TUV&CE Certified Half Cell Mono Solar Panel 550W with 182mm Solar Cell
                                  
Key Features
1. Positive Power tolerance (0-5W) Guaranteed
2. High Module Conversion efficiency ( up to 20.3%)
3. Solar power degradation -- Enabled by low LID Mono PERC Technology: First year < 2%
4. Solid PID Resistance -- Ensured by solar solar cell process opitimization and careful module BOM Selection
5. Reduced Resistive -- loss with lower operating current 
6. Higher energy yield--With lower operating temperature 
7. Reduced Hot Spot Risk -- With Optimized electrical design and lower operating current
 
 
Electrical performance parameters

 
General performance parameters

 
PRODUCT INTRODUCTION:

Solar modules are composed of solar cells with high conversion efficiency,EVA sheet,soalr glass and Tedlar(TPT) back sheet compounded from fluoro-plastic and Dacron.The module adopts reliable welding technology and high-vacuum heating aluminum alloy frame and watertight terminal box.As a result,it takes on a rational structure,and has an ultraviolet aging resistance and wind resistance of up to 2400Mpa.

The mono-crystalline silicon solar module with the average conversion efficiency up to 21% which can work effectively even in the light dim. Meanwhile the module can increase the electricity energy greatly with anti-reflection film and high transparent glass. Backed with protective sheet. The cell can be protected properly with safety steel glass. Meanwhile the water is prevented from entering by using EVA and TPT. On the frame there are 4-6 holes for making easier to install on all the systems structure. In the joint box are 3 diodes which can effectively reduce the system power losing from the hidden module.

The Poly-crystalline silicon solar module with the average conversion efficiency up to 20% which can work effectively even in the light dim. Meanwhile the module can increase the electricity energy greatly with anti-reflection film and high transparent glass. Backed with protective sheet. The cell can be protected properly with safety steel glass. Meanwhile the water is prevented from entering by using EVA and TPT. On the frame there are 4-6 holes for making easier to install on all the systems structure. In the joint box are 3 diodes which can effectively reduce the system power losing from the hidden module.
Drawing(mm)
 

 
 

 
 
 
Quality Warranty
10-year materials&workmanship warranty
25-year linear power warranty

 
Founded in 2001 in Wuhan, China, Rixin Technology operates as a global solar power provider, as well as one of the China’s leading crystalline silicon PV modules manufacturer, has been committed to developing clean energy. Rixin Technology has over 180000m² manufacturing bases, 3 wholly owned subsidiaries and over 10 holding companies, more than 500 employees. Through its rational investment and industrial, Rixin Technology has formed an entire chain including R&D of core technology, PV module production, to “photovoltaic +” project development, design, construction, intelligent operation and maintenance, investment and financing. Its technological strength is shown through its title of National Hi-tech Enterprise and Hubei province PV Research Center.
 
After 19 years development, Rixin Technology has completed more than 1500 PV power plants, and built good business relationship with the clients all over the world. The full range of Rixin Technology’s products cover BIPV, PV modules, PV street lights, Household power generation system, commericial distributed generation system, and utility-scale power system. Rixin Technology’s products have obtained TUV, CE, ISO14001, ISO9001, OHSAS18001 etc. international certificates.