Home Companies Shenzhen Socay Electronics Co., Ltd.

Socay TVS Bidirectional TVS Diodes 8.0SMDJ SMC 22V 8000W Surface Mount Transient Voltage Suppressor

Shenzhen Socay Electronics Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 4/F, Block C, HeHengXing Science & Technology Park, 19 MinQing Road, LongHua District, Shenzhen City, GuangDong Province, China

Contact name:Sun

Inquir Now

Shenzhen Socay Electronics Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Socay TVS Bidirectional TVS Diodes 8.0SMDJ SMC 22V 8000W Surface Mount Transient Voltage Suppressor

Country/Region china
City & Province shenzhen guangdong
Categories EL Products
InquireNow

Product Details

Socay TVS Bidirectional TVS Diodes 8.0SMDJ SMC 22V 8000W Surface Mount Transient Voltage Suppressor

 

DATASHEET:  8.0SMDJ_v2107.1.pdf

 

 

Weight0.007 ounce, 0.21 gram
  
CaseJEDEC DO-214AB Molded Plastic over glass passivated junction
  
PolarityColor band denotes cathode except Bipolar
  
TerminalMatte Tin-plated leads, Solderable per JESD22-B102D

 

Slection Method

1.To determine the customer's product, operating voltage, application port and required protection level, ensure that the VRWM

2.value is greater than or equal to the normal operating voltage of the customer's circuit, ensure that the VRWM value of the device is greater than or equal to the normal operating voltage of the customer's circuit.

3.It is also important to ensure that the VC (clamp voltage) value is less than or equal to the maximum voltage for the back-end chip.

4.Based on the application port and protection level, select the appropriate package and power rating.

 

8.0SMDJ22CA Description:

The 8.0SMDJ series is designed for the protection of sensitive electronic equipment from voltage transients due to lightning and other transient voltage events.

 

 
Part NumberMarking

Reverse
Stand-Off
Voltage VRWM (V)

Breakdown
Voltage VBR (V)
@IT

Test
Current
IT (mA)

Maximum
Clamping
Voltage VC @IPP (V)

Maximum
Peak
Pulse
Current IPP (A)

Maximum
Reverse
Leakage IR
@VRWM (μA)

UniBiUniBiMINMAX
8.0SMDJ14A8.0SMDJ14CA8PEG8BEG1415.6017.201023.2348.28200
8.0SMDJ15A8.0SMDJ15CA8PEK8BEK1516.7018.50124.4331.15100
8.0SMDJ16A8.0SMDJ16CA8PEM8BEM1617.8019.70126.0310.7750
8.0SMDJ17A8.0SMDJ17CA8PEP8BEP1718.9020.90127.6292.7520
8.0SMDJ18A8.0SMDJ18CA8PER8BER1820.0022.10129.2276.7110
8.0SMDJ19A8.0SMDJ19CA8PET8BET1921.1023.30130.8262.5110
8.0SMDJ20A8.0SMDJ20CA8PEV8BEV2022.2024.50132.4249.385
8.0SMDJ22A8.0SMDJ22CA8PEX8BEX2224.4026.90135.5227.615
8.0SMDJ24A8.0SMDJ24CA8PEZ8BEZ2426.7029.50138.9207.715
8.0SMDJ26A8.0SMDJ26CA8PFE8BFE2628.9031.90142.1191.925
8.0SMDJ28A8.0SMDJ28CA8PFG8BFG2831.1034.40145.4177.975
8.0SMDJ30A8.0SMDJ30CA8PFK8BFK3033.3036.80148.4166.945
8.0SMDJ33A8.0SMDJ33CA8PFM8BEM3336.7040.60153.3151.595
8.0SMDJ36A8.0SMDJ36CA8PFP8BEP3640.0044.20158.1139.075
8.0SMDJ40A8.0SMDJ40CA8PFR8BFR4044.4049.10164.5125.275

 

 

8.0SMDJ22CA Features:

 

  • Low leakage rate.
  • Chip with glass passivation
  • Uni and Bidirectional unit
  • Excellent ability to clamp down.
  • Rapid response time
  • RoHS Compliance
  • The device has a peak power capability of 8000W when using a 10 × 1000μs waveform with a repetition rate (duty cycle) of 0.01%.

 

 

8.0SMDJ22CA Applications:

TVS devices are suitable for protecting I/O interfaces, VCC buses, and other vulnerable circuits used in telecom, computer, industrial, and consumer electronic applications.

 

Maximum Ratings (TA=25℃ unless otherwise noted)
 
ParameterSymbolValueUnit
Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2)PPPM8000Watts
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)IPPSee Next TableAmps
Power Dissipation on Infinite Heat Sink at TL=75℃PM(AV)6.5Watt
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)IFSM300Amps
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4)VF3.5/5.0Voltage
Operating junction and Storage Temperature Range.TJ , TSTG-55 to +150

Notes:

1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25℃ per Fig. 2.

2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.

3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.

4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.

 

 

 

 

 

 

 

 

 

Hot Products

Product Description: Product Overview - Gas Discharge Tube The Gas Discharge Tube is a type of ...
Product Description: Gas Discharge Tube The Gas Discharge Tube (GDT) is a highly efficient and ...
Product Description: Product Overview: Gas Discharge Tube The Gas Discharge Tube, also known as GDTs ...
Product Description: Gas Discharge Tube Gas Discharge Tube, also known as GDT, is a type of ...
Product Description: Made with high-quality materials, the GDT is constructed with a ferritic ...
Product Description: With a voltage rating of 1000V±20%, the GDT Gas Discharge Tube is capable of ...