SMBJ13CA TVS Diodes Circuit Protection Transient Voltage Suppression Diode DO-214AA

SMBJ13CA New Original In Stock Circuit Protection Transient Voltage Suppressors TVS Diodes Surface Mount DO-214A​

DATASHEET:  SMBJ_v88.2.pdf

Surface Mount Transient Voltage Suppressors (TVS) SMBJ13CA Description:

• SMBJ13CA is For surface mounted applications in order to optimize board space
• SMBJ13CA has Low leakage
• SMBJ13CA is a Bidirectional component
• SMBJ13CA is a Glass passivated junction
• SMBJ13CA has Low inductance
• SMBJ13CA has Excellent clamping capability
• SMBJ13CA 's Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% is 600W
• SMBJ13CA has Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• SMBJ13CA 'S Typical IR less than 5μA above 12V.
• SMBJ13CA 'S High Temperature soldering: 260°C/40 seconds at terminals
• SMBJ13CA 'S Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT
• Plastic package has Underwriters Laboratory Flammability 94V-0
• Matte tin lead–free Plated
• SMBJ13CA has Halogen free and RoHS compliant
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
• EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)

TVS Diode SMBJ13CA Electrical Characteristics (T_A=25℃ unless otherwise noted):

SMBJ series TVS transient suppression diode products adopt standard surface mount SMB packaging, with a peak rated power of 600W. The product has extremely fast response time (sub-nanosecond) and very high stability. Designed specifically for the protection of various interfaces in electronic circuit applications from transient voltages caused by lightning strikes and other transient voltage events.
Product Features
Low profile package
Ideal for automated placement
600 Watt peak pulse power capability with a 10/1000μs waveform
For surface mounted applicators to optimize board space
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Applications
Power supply protection
Automotive application
Industrial application
Power management

Please contact us if you are looking for these electronics components. We are manufacturer and supplier with over 20 years of experience.

1- ESD
2- TVS Diodes
3- PPTC Resettable Fuse
4- Gas Discharge Tube
5- NTC Themistor
6- Varistor,etc.