|
[China]
Trade Verify
Address: HENGFENG INDUSTRIAL AREA,ZHOUSHI ROAD NO. 739,HEZHOU COMMUNITY,HANGCHENG STREET,BAOAN,SHENZHEN,CHINA
Contact name:Linda
Shenzhen Eton Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Fully Automatic stencil printer machine
Brief introduction of ET5235
The PCB loading direction of ET5235 can be selected and combined freely.with unique crafted internal gear conveyor belt to prevent jamming.Adopt programmable transport speed control makes PCB stop more precise and use flexible side clamps and segmented supports to effectively clamp the PCB to ensure a fully balanced contact between the PCB and the steel mesh.The optimally designed module drive structure effectively improves the stability of the platform calibration,and realizes ultra-small transmission under fine-tuning,so that the machine can meet the printing requirements of higher precision.The structure is simple and reliable,the adjustment is convenient, and the height adjustment of the support PIN of the PCB board with different thicknesses can be quickly realized.The most important thing is that the operating system is simple.The operation interface is simple and easy to learn and use;it has a good man-machine dialogue function;the program file has teaching and navigation functions, each step has a prompt,Chinese and English key switching, as well as fault record analysis and diagnosis functions.this machine is suitable for printing the max PCB size is 520*350mm,the mini size is 50*50mm.
Parameter
| MODEL | ET5235 | |
| Screen Frames | Max Size | 737mm |
| Min Size | 470mm | |
| Thickness | 25 〜40mm | |
| PCB size | Max: 520x350mm Min: 50x50mm | |
| PCB thickness | 0.6 〜6mm | |
| PCB warpage | <1% ( Max PCB diagonal) | |
| Transport height | 900 ± 20mm | |
| Transport direction | Left-Right; Right-Left; Left-Left; Right-Right | |
| Transport speed | Max 1200mm/s Programmable | |
| Board location | Support system | Magnetic Pin/Up-down table adjusted by manual |
| Clamping system |
Unique top flattened,side clamping | |
| Print head | Two independent direct-connect motor-driven printheads | |
| Squeegee speed | 6~300mm/sec | |
| Squeegee pressure | 0~10kg/cm2 | |
| Squeegee angle | 55° (Standard) | |
| Squeegee type | Steel scraper(Standard),PV scraper(Option) | |
| Stencil separation speed | 0.1 〜20mm/sec Programmable | |
| Cleaning system | Dryx Wet,Vacuum (Programmable) | |
| Table adjustment ranges | X: ± 5mm;Y: ± 5mm; 9 : ± 2° | |
| Printing accuracy | ± 0.025mm | |
| Cycle time | W9s (Exclude printing & cleaning) | |
| Product changeover | <5Min | |
| Air required | 4.5〜6kg/cm' | |
| Power input | AC:220 ± 10%,50/60HZ 1 3KW | |
| Control method | PC control | |
| Dimension | 1240(L) x 1450(W) x 1650(H)mm | |
| Weight | Approx:700kg | |
| PCB transfer overhead height | 10mm | |
The working principle
The working principle of the full-automatic printer is that the circuit board to be printed is first fixed on the printing positioning table, and then the left and right scrapers of the printer print the solder paste or red glue on the corresponding pads through the steel mesh, and the PCB with uniform printing is input to the mounter through the transmission table for automatic mounting.
Precautions for the use of the printing machine: The best scraper material is steel scraper, which is conducive to the forming and stripping of the solder paste printed on the PCB.The thickness of the steel mesh and the shape and proportion of the openings shall be selected according to the requirements of the product. The tension test shall be carried out on the steel mesh once a week, and the required tension value shall be above 35 N/cm.And when printing 5-10 PCB boards continuously, wipe them once with dust-free screen paper, preferably not with rags.
Customer’s market
ETON is famous for the top technology of high speed pick and place machine, at present, having more than 80% LED manufacturer are our partners in China, in addition the Chinese market, we also got large market share in South Korea, India, Vietnam, Turkey, Egypt, Iran, Thailand, Indonesia more than 20 countries.we have service office and local India engineer, can install, debug and training you for free,until you learn to operate the machine.Besides India,also have local engineers in Egypt,Turkey,can provide you with timely services.As the market continues to expand, we will set up more service office overseas.
By the way, our company not only has so many large clients in China, our products are also exported to more than 20 countries, including South Korea, India, Vietnam, Turkey, Egypt, Tunisia, Iran, Germany, etc.
FAQ
Q: How is the training?
A: After purchasing our products, you can send your engineers to study in our factory, or we can send our engineers to yourfactory to train your staff for you .
Q:Does your full-automatic printing machine support 2D detection?
A:Yes, our full-automatic printing machine supports 2D detection function.
Q:Can you provide suppliers of raw materials?
A:Yes, we can recommend suppliers of raw materials to you.
