380V 50HZ SMT Mounting Machine For DOB Bulb / Lens / Power Driver

SMT mounting machine for kinds of application,DOB bulb,lens,power driver etc.

Technical parameter

Dimension:2550*1650*1550mm

Total Weight:1700kg

PCB Length Width:Max:1200*500mm Min:100*100mm

PCB Thickness:0.5-5mm

PCB Clamping:Adjustable pressure pneumatic

Mounting Mode:Group picking and separate placingseparate picking and separate placing

Software:R&D independently

Mounting Precision:±0.04mm

Mounting Height:<15mm (Automatic Changing)

Mounting Speed:45000 CPH

Components:LED,capacitors,resistors,IC,shaped components, etc.

Transmission Direction:Both direction (option)

Product features

1. Voltage: LED bulbs use a low-voltage power supply, between 2 and 4 volts, depending on the product, so it is driven by a more secure than high-voltage power supply, especially for public places;

2. Current: working current in 0-15 Ma, brightness with the increase of current brightens

3. Efficiency: use 80% less energy than incandescent bulbs with the same light efficiency.

4. Serviceability: very small, each unit LED chip is 3-5mm square, so can be made into a variety of shapes of devices, and suitable for volatile environments.

5. Response time: the response time of incandescent lamp is millisecond, and that of LED lamp is nanosecond.

6. Environmental pollution: no harmful metal mercury. 7.Color: color can be changed by changing the current, and the light-emitting diode can be conveniently modified by chemical methods to adjust the band structure and band gap of the material to achieve multi-color red, yellow, green, blue and orange luminescence.

Related machine

Single rail conveyor

For connections between SMT production lines, PCB buffering, inspection, testing, or electronic component.

Operation Flow

1.1Before power-on Check

1. check the supply power cord is broken.

2. Check that the equipment is properly grounded.

• Check that the control buttons are reset.
• Check whether the guide rail width is appropriate.
• Check that the belt is loose.
• Above no exception can be started to prepare for work.

2.2 order of operation

1.control panel note finish button without self-lock, each click, that check is completed,PCB through, continue to run. 2.Pass PCB board without check, automatically pass; 3.press check means PCB board need manual check, need to use with finish.

4.Power is the power switch, press power

5.Light is the light switch.

3.3The operating step explains

1. adjust the belt running speed according to the speed of the front and back connection.

2. automatic control mode

a. Press the Power Button;

b. Press the LIGHT button;

c. Press the PASS/CHECK button.

• Manual control mode

a. Press the POWER button;

b. Press the LIGHT button;

c. When you are finished, press the FINISH button.

d. Turn it off and press the POWER button