|
[China]
Trade Verify
Address: HENGFENG INDUSTRIAL AREA,ZHOUSHI ROAD NO. 739,HEZHOU COMMUNITY,HANGCHENG STREET,BAOAN,SHENZHEN,CHINA
Contact name:Linda
Shenzhen Eton Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
1.product details
Components: LED3014/3020/3528/5050 and resistor,capacitors,bridge
rectifiers,etc.
Application:5m,50m or any length of flexible strip and roll to roll;RGB
2.product Technical parameters of high speed pick and place machine
| Model number | HT-T9 |
| Dimension | 2450*2100*1550mm |
| PCB size | 250mm*any length |
| PCB thickness | 0.5～1.5mm |
| PCB clamping | adjustable pressure pneumatic |
| mounting mode | group to take and group to mount |
| system | windows 7 |
| display | touch screen monitor |
| input device | keyboard,mouse |
| NO.of camera | 5 sets of imported camera |
| mounting precision | ±0.02mm |
| mounting height | <13mm |
| mounting speed | 200000CPH |
| components space | 0.2mm |
| NO.of feedings station | 64pcs |
| NO.of nozzles | 64pcs |
| power | 380AC 50HZ |
| power consumption | 6KW |
| operating environment | 23℃±3℃ |
| conveyor transmission | any length |
| transmission speed | >500mm/sec |
| transmission direction | single(left→right,right→left) |
| transmission mode | online drive |
| position mode | optical |
| Air Force | 0.5mpa |
| electrical control | independent research and development by ETON |
| motion control card module 1set | independent research and development by ETON |
| X.Y axis drive way | high-end magnetic linear motor+servo motor |
| feeding way | electric feeder with double motor |
3.product features of smt pick and place machine
4.Packing & shipping of smt mounter machine
5.Company profile
6.Our Our certificates and certifications
7.our services
8. trade show
Industry related knowledge
The end of the mounting head of the mounting machine has a mounting
tool controlled by a vacuum pump, that is, the suction nozzle.
Components of different shapes and sizes are often picked up with
different suction nozzles. after the vacuum is generated, the
negative pressure of the suction nozzle draws the SMD components
from the feeding system (bulk bin, tubular hopper, disc paper tape
or tray packing). the suction nozzle must reach a certain vacuum
degree in order to judge whether the pick-up components are normal.
When the component side stand or because the component "clip tape"
can not be sucked up, the placement machine will send an alarm
signal. A mounting head suction nozzle picks up the components and
places them on a PCB moment, usually using two methods. One is
according to the height of the component, that is, input the
thickness of the component in advance, when the patch head drops to
this height, the vacuum releases and puts the component sticker on
the pad. Because of the individual differences of components or
PCB, this method can cause premature or too late placement, which
can cause component shift or flying defect. Another more advanced
method is based on the reaction of components and PCB contact
moment, under the action of pressure sensor to achieve the soft
landing, so the patch is easy, not easy to appear shift and flying
chip defects.
the suction nozzle is the component that directly contacts the
components. in order to adapt to the mounting of different
components, many placement machines are still equipped with a
device to replace the suction nozzle. there is also a buffer
mechanism of elastic compensation between the suction nozzle and
the suction pipe, which ensures the protection of the patch
components during the picking process.
The suction nozzle is in contact with the components in high speed
motion, and its wear is very serious, so the material and structure
of the suction nozzle are paid more and more attention. Early use
of alloy materials, and then changed to carbon fiber wear-resistant
plastic materials, more advanced suction nozzle using ceramic
materials and diamond, so that the suction nozzle more durable.
With the miniaturization of the components, and the gap with the
surrounding components is also decreasing, the structure of the
suction nozzle is adjusted accordingly. Open a hole in the suction
nozzle to ensure that in the absorption of small components such as
0603 to maintain balance, suction and mount without affecting the
peripheral components, easy to mount.
contact
Name:Brynn
Email :Brynn@eton-mounter.com
WeChat:13802252825
Telephone:138 0225 2825
