Semi Auto SMT Mounting Machine Stencil Printer For PCB Printing 0.6m

Semi Auto Pcb Semi Automatic Stencil Printer For Pcb Printing 0.6m

Semi-auto stencil printer 600mm ET-S600

Application:

Semi-automatic printing presses are currently the most widely used printing equipment. They are actually similar to manual printing machines. The placement and removal of PCBs is still manual. The main difference from manual machines is the development of printing heads. They can be well controlled. Printing speed, blade pressure, blade angle, printing distance and non-contact spacing, tool holes or PCB edges are still used for positioning, while the steel plate system helps people to complete the parallelism adjustment between PCB and steel plate. This type of printing machine is more manual than manual. The solder paste printing machine has been greatly improved, and the output and quality have been improved!

Parameter:

Dimension:

Semi-automatic printer ET-S600 is 1.4 m length, 0.8 m width, 1.68 height.

Weight: Approx.200Kg

The platform size is 0.3*0.3 m

The temlate size is 0.55*0.83 m

PCB size:

The PCB size is 0.25*0.55 m

The PCB thickness is 0-50 mm

The PCB fine tuning range is Front/side±10mm

Others:

The Power supply: 1PAC220V 50/60HZ

The Platform height: 850±20mm

The Repeatability precision: ±0.01mm

The Positioning mode: Outside/Reference hole

Attention:

1.Printing quality control:

The printer should be responsible for the quality of the printed board. For the board of Lianxi, Shaoxi and Duoxi, the board cannot be pulled down.

2. Every time the steel mesh is used, the surface, side surface and steel mesh hole of the steel mesh should be carefully cleaned. In particular, the steel mesh hole needs to be cleaned with a toothbrush to prevent the solder paste from being clogged and affecting the tin. The steel mesh should be stored on the steel grid, and the side of the logo should be on the outside for easy searching.

Company information:

Shenzhen ETON Automatic Equipment Co.,ltd is the largest manufature of pick and place machine in China.

Set up in 2011, focus on smt technology and got large market share on smt market. We are high-tech company with CCC, CE, SIRA.

We have factory in Shenzhen, office in zhongshan, zhejiang, India Delhi and Mumbai, can procide service quikly.