Shenzhen Eton Automation Equipment Co., Ltd. |
Verified Suppliers
|
|
■ Suspended print head with programmable pressure automatic
adjustment system
a) Programmable pressure automatic adjustment system support
visible pressure values of front and rear squeegees and ensures
accurate pressure control.
b) Pressures of front and rear squeegees are separately adjusted,
to compensate pressure imbalance caused by fatigue deformation of
squeegee to prevent from different printing quality in front and
rear.
■ Standard stainless steel squeegee, unique design to improve the
lifespan of squeegee blade.
■ Suneast Vision alignment system
■ Table X/Y/θ automatic calibration system.
■ PCB clamping and support system. .
a) Magnetic pins;
b) PCB flexible side clamping system to ensure no bending and
deformation during PCB clamping
c) Strong vacuum suction (optional)
d) Elastic Z-direction pressing tablets (optional)
e) Flexible automatic pins(optional)
■ NC slide way adjustment for conveyor width and speed.
■ Dry-type, wet-type and vacuum-type with arbitrary combination for
stencil cleaning system.
■ System Requirements: IPC (Industrial Personal Computer) with
Windows XP System
■ Built-in software diagnosis system.
■ Support 2D, SPC software function.
■ Standard SMEMA link port.
HT-ET1500 Technical Parameter | ||
1 | Dimension | 2455mm(Length)*1400mm(Width)*1520mm(Height) |
2 | Total Weight | 1800KG |
3 | (X*Y)Maximum board size | 1500mm*500mm |
4 | (X*Y)Minimum board size | 80mm*50mm |
5 | Warpage | Max. PCB diagonal line 1% |
6 | PCB Thickness | 0.8-6mm |
7 | Maximum board weight | 12KG |
8 | Board margin gap | Configuration to 3.5mm |
9 | Maximum bottom gap | 20mm |
10 | Transmission speed | 1200mm/s(MAX) |
11 | Transmission height from the ground | 900±40mm |
12 | Transfer orbit direction | Left-Right,Right-Left,Left-Left,Right-Right |
13 | Transfer mode | One stage orbit |
14 | PCB clamping method | Programmable flexible side pressure,bottom integral suction cavity vacuum(Optinal:2 multipoint partial vacuum at the bottom) |
15 | Support method | Grid-Lok,magnetic thimble,equal high block,special workpiece fixture,grid-lok(optional) |
16 | Printing head | Suspended intelligent closed loop printing head(Linear motor) |
17 | Template frame size | 737mm*370mm~1800mm*737mm |
18 | Maximum printing area | 1500mm*500mm |
19 | Scraper type | Steel scraper/glue scraper(angle 45︒/55︒/60︒ matching the printing process |
20 | Scraper length | 220mm~520mm |