Specializing in the production of SMT automatic cutting machine with one year warranty

SMT automatic cutting machine

Product instruction

This machine for SMT strip cutting equipment, used for SMT machine of material recycling;

There is usually no built-in recovery function of the placement machine, recycling waste material is done with garbage can, personnel hand used scissors to cut;

SMT strip cutting machine is completely replace manual cut strip, and implements the function of material, film can shear;

Recycling to SMT internal scrap of material shearing strip cutting machine, and the shearing strip, film drops in SMT strip cutting machine with recycled drawer, convenient staff finally focus on;

Not only give employees a good working environment, better able to demonstrate good 5 s management ability, have demonstrated in their customer visit, full of praise for their production line 5 s, especially the lines of the placement machine);

The machine features

New cutting machine is suitable for the SMT various material, from 0.05 mm film to 1.5 mm thick belt can be easily cut;

Patent (patent no. ZL201520023125.6) equipment beautiful and easy, small mask, use and storage are very convenient.

Under the specific size can be according to customer's various placement machine feida customized recycling area.

Blade: material import SKD - 11, one year warranty without knife.

Patent (patent no. ZL201530007763.4) serrated knife roll cutting institutions,

When cutting on the bottom of the serrated knife eight root spring tension make serrated knife blade surface

and straight knife point contact tangent, solve the common straight knife to cut up and down on the market

the disadvantages of the blade wear fast, we guarantee cutting machine for two years (including blade),

straight knife can use flip, serrated knife can grind repeatedly.

At the same time fully

To solve the traditional cutting machine use small blade met strip cutting back and forth more frequently stuck phenomenon.

Like the picture on the right microcomputer intelligent control, cutting time, length can be set.

A key to start/stop, easy to operate.

Waste recycling installation place with security sensors, remove the device automatically stop working when the material box, prevent employees from hand work area from the equipment into the equipment at the bottom of the tool, to ensure safety.

At the same time ensure that after the shear raw material all fall into the recycling box.

As shown in figure 3

Shearing stroke two head with extreme limit switch equipment, beyond the machine power.

One thousand photoelectric switch that prevents the cutter working out of the limit, the motor has also been after failure, burning motor cause a short-circuit.

As shown in figure 4

Linear slide rail: silver brand, run smooth,

Universal casters: universal casters with four belt brake, convenient transportation.