Shenzhen Wanbo Hi-Tech Co., Ltd. |
|
SMT transfer table 0.6m 1.5m with signal communication interface Docking presses
White SMT splicing table 0.5m 0.6m 1m with aluminum profile rail Panasonic CM602
Features
1.Modular design
2. Sturdy design improves stability
3. Ergonomic design makes the arm less fatigued
4. Smooth and parallel width adjustment (screw bar)
5. Optional circuit board detection mode
6. Customized machine length according to customer requirements
7. Variable speed control
8. Anti-static rubber is used
9. Compatible with SMEMA interface
Technical parameters
Description | This equipment is used for connection between SMT and AI lines, jogging between PCBs, inspection, testing or manual insertion of electronic components |
Conveyor Type | Round belt or flat belt |
Conveyor speed | 0.5-20 m/min or user specified |
Power supply | 100-230V AC (user specified), single phase |
Electrical load | Max. 100 volts A |
Conveyor height | 900±20 (or user specified) |
Conveyor direction | Left→right or right→left |
SMT splicing table operation step by step instructions
Adjust the speed of belt operation according to the speed of front
and back splicing.
1,SMT splicing table automatic control mode
a Press the POWER button.
b Press the LIGHT button.
c Press the PASS/CHECK button.
2,SMT splicing table manual control mode
a. Press POWER button; b. Press LIGHT button; c. Press PASS/CHECK
button.
b. Press the LIGHT button.
c. When the inspection is finished, press the FINISH button.
New function: direct change of transport direction by pressing the
button, standard left-to-right, button pressed: right-to-left.
All signals change with the direction of transportation,
eliminating the need to change complex routes.
SMT dock operation step process
SMT splicing table operation precautions
1,Ensure that the transport part, belt, pulley and transport guide
are free of foreign matter to ensure smooth and smooth transport.
2,Regularly refuel the transmission part and the rack or adjust the
width of the screw, refueling must be performed in the shutdown
state.
3,In case of power failure, turn off the main switch of the
equipment immediately.
The role of SMT docking station is to connect between SMT
production lines.
PCB buffering, inspection, testing or manual insertion of
electronic components can also be used.
The width of all splicing tables is 650MM and the height is 900MM
adjustable.
The total height with light stand is 1850MM adjustable.
SMT chip attaching table (various lengths can be customized)
The company distributes and retails SMT equipment and accessories,
supplying Samsung placement machines, JUKI placement machines,
FUJI placement machines, YAMAHA placement machines, Panasonic
placement machines,
SANYO, SONY, PHILIPS, HITACHI, GSM, MIRAI, IPULSE, CASIO, EVEST,
UZUKI, CHINA PLACEMENT MACHINE,
SPECIAL CUSTOMIZATION AND OTHER MECHANICAL EQUIPMENT AND
ACCESSORIES.