Active Member
|
[China]
Address: Fuyong Xinhe Sanqu, 7 Xiang 12 Hao 102, Bao'an, Shenzhen, Guangdong, China
Contact name:Su Zhongqiu
Shenzhen Wanbo Hi-Tech Co., Ltd. |
|
|
Second Hand SMT Assembly Machine JUKI KE 2070 2050 2060 2080 3010 3020
SMT Assembly Machine Second-hand JUKI KE-2070/2050/2060/2080/3010/3020/FX-1R
Second-hand JUKI KE-2070 smt assembly equipment SMD Bluetooth headset charger
JUKI KE-2070 Pick And Place Machine with a theoretical 23300 points per hour
JUKI KE-2070 equipped with 6 standard SMD heads Element height 6mm specifications
JUKI KE-2070 Pick And Place Machine Remote technical support of equipment
Multifunctional SMT Placement Machine 6 Heads For LED Power Driver / IC Chip
Shenzhen Wanbo High-tech Co., Ltd. has a JUKI senior engineer team with rich maintenance experience, specializing in providing JUKI series placement machine software and hardware maintenance and troubleshooting. It mainly includes JUKI laser head, CPU motherboard SUB-CPU board, drive board X/Y/Z/T axis driver, head board, image control card, I/O board, JUKI servo motor, camera, display touch screen, servo motor and other maintenance and replacement services. The company's fees are reasonable, the warehouse accessories are sufficient, the maintenance cycle is short, the one-time repair success rate is high, and the Pearl River Delta region can provide door-to-door installation, commissioning, maintenance and maintenance.
Operation manual I
Step 4Select the PWB production screen.
①Select the button from the main screen.
② The PWB production screen appears.
lf you have to make various settings such as setting of the
conveyor widthaccording to a PWB to be produced = Go to "Step 5."
lf you do not have to make any settings such as setting of the
conveyor widthSkip to "Step 6."
Step 5
Set a board.
When you change the size of a board, you have to adjust the
conveyor width and theposition of the pusher X to the size of a
board.
This manual describes how to adjust the standard shape reference
machine.Refer to Section 2.7.1.3 "Pin reference adjustment" of the
"Instruction Manual CD"for how to adjust the pin reference
(optional) machine.
<Step 1> Adjust the width of the board transport rail to a
board.
①Loosen the adjustment stopper, and turn the adjustment handle to
move the pusherX toward the lN buffer.
1.Loosen the setscrew of the adjustment stopper.
2. When you turn the adjustment handle, thepusher X starts moving.
3. Move the pusher x toward the lN buffer.
② Turn the handle knob to adjust the width of the board transport
rail to a board to be used.
Turn the handle knob to adjust the widthof the board transport
rail.
After adjustment,
remove the handleknob.
Adjust the rail width so thatthe distance between theboard and the
rail can be 0.5mm to 1 mm.
Check to see if a board canbe transported smoothlyover the
transport rail.
| Model name | High speed placement machine KE-2070M/L/E |
| Substrate size | M substrate (330×250mm) ○ l For substrate (410×360mm) ○ E substrate (510×460mm) ○ |
| Element height | 6mm specifications ○ 12mm specifications ○ 20mm Specifications _ 25mm Specifications _ |
| Component size | Laser identification 0402 (imperial 01005) chip ~ 33.5mm square element Image recognition 1.0×0.5mm~33.5mm square element |
| Component placement speed | Optimal conditions 0.155 sec/chip (23300CPH) IC Component 4600CPH* |
| Component placement accuracy | Laser recognition ±0.05mm Image recognition ±0.04mm |
| Component placement type | Up to 80 types (converted to 8mm belt) |
| power supply | Three-phase AC200~415V |
| Rated power | 3KVA |
| Use air pressure | 0.5±0.05Mpa |
| Air consumption | (Standard status) 345L/min |
| Device size (W×D×H) | M substrate 1,400×1,393×1,455mm L substrate 1,500×1,500×1,455mm E substrate 1,730×1,600×1,455mm |
| weight | 1530kg |
Accessories include: all kinds of original, domestic nozzles, FEEDER, boards, lasers, solenoid valves, inductors,
cylinders, tank chains, etc.), laser maintenance, board maintenance and so on.
