SMD LED Lens Pick And Place SMT Assembly Machine M substrate 330×250mm

SMD LED Lens Pick And Place SMT Assembly Machine M Substrate 330×250mm

SMD LED or lens Pick And Place Machine Juki KE-2070 M substrate 330×250mm

Stable Performance SMT Pick And Place Machine For LED Lighting Factory Used Juki

High Speed SMT Assembly Machine / Pick And Place Machine For Lighting Factory

High Accuracy SMD JUKI KE-2070 high speed Pick and Place Machine 0.155 sec/chip

Shenzhen Wanbo High-tech Co., Ltd. has long introduced second-hand JUKI placement machines, the company specializes in SMT equipment: placement machines, plug-in machines, SMT peripheral equipment; Accessories: Feida, suction nozzle, JUKI laser head, CPU motherboard sub-CPU board, drive board X/Y/Z/T axis drive, headboard, image control card, I/O board, JUKI servo motor, camera, display touch screen, servo motor, etc.;

Common models include KE-730/KE-750/KE-2010 2030 2050 2060 2070 2080 3010/FX-1/FX-2 FX-3, which is widely used KE-2050 KE-2060 FX-3, of which FX-3 is a high-speed machine and LED special mounting machine JX100 JX200 JX300

Use Environment
1. Use the machine in the environment free from effects of noise sources (magnetic waves), such ashigh-frequency welders, in order to prevent accidents due to erroneous actions.
2. In order to prevent accidents due to erroneous actions, use the machine in the environment where thesource voltage is within the power supply ±10%.
3. In order to prevent accidents due to erroneous actions, do not use the machine in the environmentwhere the supplied air pressure is 0.5±0.05MPa.
4. To ensure safety, use the machine under the following environment:Environment requirements during operation
Temperature : 10℃ to 35℃Humidity: 30％ to 80％RH (No condensation)Altitude: 1,000m or less
5. To prevent accidents due to breakdown of electric/electronic parts, turn on power supply sufficientlyafter the fear of dew condensation is eliminated, because such condensation may occur when themachine is rapidly moved from a cold place to a warm location.
6. To prevent accidents due to breakdown of electric/electronic parts, stop the use of the machine duringlightning, and draw out the power supply plug.

Accessories include: all kinds of original, domestic nozzles, FEEDER, boards, lasers, solenoid valves, inductors,

cylinders, tank chains, etc.), laser maintenance, board maintenance and so on.