|
[China]
Trade Verify
Address: 706, Huafa xiezilou ,Huafa North Rd., Gongming Street , 518106 , SHEN ZHEN ,CHINA
Contact name:Nick Chou
SHAREWAY TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
Non-shielded winding wire power inductor coil with RoHS
Description:
| Profile Feature | Pb-Free Assembly | Sn-Pb Assembly |
| Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (ts) from (Tsmin to Tsmax) | 150°C 200°C 60-120 seconds | 100°C 150°C 60-120 seconds |
| Ramp-up rate (TL to TP) | 3°C/ second max. | 3°C/ second max. |
| Liquidous temperature (TL) Time (tL) maintained above TL | 217°C 60-150 seconds | 183°C 60-150 seconds |
| Peak package body temperature (Tp) | See Table H3 | See table H3 |
| Time within 5°C of actual peak temperature (tp) | 30 seconds | 20 seconds |
| Ramp-down rate (TP to TL) | 6°C/ second max. | 6°C/ second max. |
| Time 25°C to peak temperature | 8 minutes max | 6 minutes max. |
E General information:
It is recommended that the temperature of the part does not exceed
125°C under
worst case operating conditions.
• Ambient temperature: -40°C to +85°C (refering to IR)
• Operating temperature: -40°C to +125°C
• Storage temperature (on tape & reel): -20°C to +40°C; 75% RH
max.
• Coplanarity of the terminal pads: 120μm
• Test conditions of Electrical Properties: 20°C, 33% RH
• AEC-Q 200 qualified
