Active Member
|
[China]
Address: CN , Guangdong , Shenzhen, , Room 8416, Shifeng Building, No. 6267, Baoan Road, Fuhai Street, Baoan Dist.
Contact name:Judy Xiong
Shenzhen Redsun Electronics Co., Ltd |
|
|
RF Remote Control Outdoor garden decorative 3D led moon lamp night light, Waterproof IP68 Ball Shape LED Garden Lamp
Led Atmosphere Lamp Features
1. The (IR) Infrared Distance is 3-5 meters, and RF Remote Control Distance is 50-80 meters, the Infrared
light penetrates the wall for option
2. The LED Lighting can be 16 RGB colorful light or single color like Warm White, Pure White, Cold White,
Blue, Green, etc for option.
3. Different shapes for option:
(a). Ball Shape LED Garden Lamp diameter 20cm, 25cm, 30cm, 40cm, 50cm;
(b). Stone Shape LED Garden Lamp 22x18x12cm,
28x22x14cm, 32x26x18cm;
(c). Ellipsoidal LED moon Lamp, 28x28x17cm, 31x31x18cm, 32x32x20cm, 35x35x13cm, 35x35x20cm,
35x35x27cm
4. Charging time: 4-6 Hours, Working time: 8-12 Hours
5. One to one control / one to many control optional
6. IP68 can be used for swimming pool
| Specification | |
| Material | PE plastic material |
| Body color | White |
| Color temperature | 2800-6500K |
| Life time | 30,000 Hours |
| Light source | White / RGB LED Lights |
| Color rendering index | >80RA |
| Charging Adapter | 100-240V AC, 5V DC, 1.5A, with US, EU / UK, AU Plug |
| Battery capacity | 3.7V 2000mAh Li-ion battery |
| Certification | FCC, CE, ROHS |
| Package | 1 x Wireless charging LED garden night light, 1 x Power Adaptor, 1 x Manual |
1. How to turn on the device?
a. Pressing the ‘All’ button press the ‘on’ button,
then all LED balls will be on.
b. Pressing the code of the LED Ball, then press ‘OK’
press ‘ON’ button, corresponding LED ball will
be on.
c. Short press the ‘ON/OFF’ button of the LED ball,
then the LED ball will be on.
Please note: the device will be blocked
if without any operation on it after 5 seconds. Any operation
will didn’t work in the case of the
device blocked.
2. How to set code of the device?
Long press the ‘on’ button of the ball for 5 seconds, when the LED
ball turns blue color that means it
enter in code setting mode press ‘code’ button and press any number you need(from 00 to 99)
press‘OK’ for confirm the code setting and the ball lighting will turns red color.
Please note: the device will be blocked if without
any operation on it after 5 seconds. Any operation
will didn’t work in the case of the device blocked.
3. How to make a group of the LED ball?
Setting a group of LED ball with one number, such as 10 LED
balls been named ‘01’, so all NO.01
LED ball could be control at same time.
