Digital Single Phase Energy Meter , Stable / Reliable Reactive
Power Meter
Main Feature
- Three phase LED/LCD display
- Power supply :AC/DC85-265V
- Voltage rated value:AC 25-500V
- Current rated value: AC 0~5A
- Frequency:45~65Hz
- Measuring Display:three phase voltage,current,power,power
factor,frequency,energy.
- RS485 communication interface
Description
With high accuracy, good sensitivity and excellent resistance to
vibrations,Sanda's digital three phase multifutional electric meter
can be used as electricity parameters indicator to replace analog
pointer meter . Also it may be as the front-end collection
components of automation system. And also it may be acted as
continuous measurement and monitoring unit of power distribution
system. The main application fields are following:
▪ Factory dynamic system automation and load control;
▪ SCADA, DCS, EMS integration manufacturer;
▪ Substation general automation;
▪ Power plant Electric DAS;
▪ Post Office Power Supply Systems, Intelligent Building
▪ Energy Management System
And man-machine interface let the meter more simple and better to
understand. Voltage,current,,power,power factor, frequency,electric
energy can be displayed in real-time on the panel. Communication
parameters and analog parameters, can be set through the panel.
Data are stored in nonvolatile memory and would not be lost even on
power-off. And the data can be reserved more than 10 years.
Datasheet
| Accuracy of measurement: | ACtive meter :0.5 class
reactive meter : 0.5 class | | Signal input | 1.Connection mode of four phase three wire, three phase three line
2. Rated current of AC1A, AC5A
3. Over load:voltage of 1.2 times( Continued ), times / second (
instantaneous )
4. Current of 1.2 times( Continued ), 10times / 5second (
instantaneous )
5. Power <1VA/ phase current <0.4VA/phase
6.Impedance:voltage>300KΩ current <20mΩ
7. Frequency: 45-65Hz | | Auxiliary power supply | 1.Working range of AC/DC 80V~270V, AC220V, AC380V, AC100V
2. Power consumption < 4VA | | Function module | 1.Communication interface 1 way RS-485 communication, Modbus-RTU
protocol
2. baud rate: 1200~9600bps, the default 2400bps
3. Switch input support 2 stem node input
4.The switch output support 2 relay output, capacity: AC 250V/5A,
DC 30V/5A
5. Transmission output support 1 analog output: 0/4~20mA or 0~5/10V | | Environment | 1.Working temperature: -10°C~+55 °C
2. Storage temperature: -25°C~+70 °C
3. Relative humidity is less than 93%, no corrosive gas
4.Elevation≤ 2500m | | Safety | 1.Insulation resistance >100M Ω
2.AC withstand voltage AC 2KV | | Electromagnetic compatibility | 1. ESD level 4
2. Electrical fast transient burst level 4
3. Surge ( impact) level 4 |
|
