Active Member
|
[China]
Address: No.28, Chengwen West Road, Gaocheng Town, Yixing City, Jiangsu Province, China
Contact name:Ye Bing
Jiangsu Longdai Environmental Protection Co., Ltd. |
|
|
Low Noise High Efficiency China Belt Style Wastewater Sludge Dewatering Machine Filter Press For Sludge Dewatering
Brief Introduction
Located in Yixing, an advanced and beautiful city of Jiangsu Province, China, Longdai Co., Ltd is a processing equipment supplier of petrochemical industry specialized in environmental processing &integrating independent research and development, design, general contracting, environmental protection equipment manufacturing, and relevant material supply.
Structure and Working Principle
The equipment tensions the upper and lower filter belts through a series of rollers and drums. The sludge sandwiched between the filter belt shear force continuously squeezes the free water in the sludge to complete the mud-water separation process. . The dehydration process is generally divided into three stages: gravity dehydration section, wedge pre-press section, medium and high shear dehydration section.
Main Features
1. The stepless adjustment of the motor drive can adjust the running speed at any time, and the adaptability is strong.
2. The special flushing nozzle and anti-clogging device make the filter belt flush clean.
3. The dewatering head roller adopts T-shaped drain groove, and the squeezed water flows out quickly.
4. The gravity dewatering section is inclined, and the static head of the sludge is enlarged, which can enhance the dewatering effect and make the sludge fully thickened before pressing.
5. The whole machine has a compact structure, automatic correction of the filter belt, low operating noise, low power consumption, low dosage, good dehydration effect, and low operating cost.
| Parameter / model | DNT-500 | DNT-1000 | DNT-2000 | DT-2500 | DNT-3000 | |
| Filter - band width b(mm) | 500 | 1000 | 2000 | 2500 | 3000 | |
| Handling capacity Q(m3／h) | 5~10 | 10~20 | 30~40 | 40~60 | 60~80 | |
| Outline dimension (BxLxH) | 1200x5160x2350 | 1700x5160x2350 | 2700x5160x2570 | 3200x5300x2570 | 3700x5300x2570 | |
Filter - belt running speed V(m／min) Concentrate motor power N1(KW) | 3.0～15(enriching section ),1.2～6.0( dewatering period ) | |||||
| 0.55 | 0.55 | 1.1 | 1.5 | 1.5 | ||
| Dewatering motor power N2(KW) | 0.75 | 1.1 | 3.0 | 3.0 | 5.0 | |
| Hecharge discharge height h(mm) | 1250 | 1250 | 1500 | 1800 | 1800 | |
| Wash water | Water consumption (m3／h) | 4.0 | 7.5 | 15.0 | 25.0 | 30.0 |
| Water gage(MPa) | ≥0.5 | |||||
| Compressed air | Gas consumption (m3／h) | 0.3 | 0.3 | 0.4 | 0.4 | 0.4 |
| Pressure(MPa) | ≥0.7 | |||||
| Ineding water content(％) | 99.61/99.0 | |||||
| Water content rate of mud cake (％) | 80/78 | |||||
| Dry mud(kgds／h·m) | 110~130 | |||||
| hydraulic load (m3／h·m) | 22~26/12~16 | |||||
| Installation size (ww) | B1 | 1850 | 2450 | 3450 | 3950 | 4450 |
| B2 | 1350 | 1950 | 2950 | 3450 | 3950 | |
| B3 | 1150 | 1750 | 2750 | 3250 | 3750 | |
| B4 | 950 | 1450 | 2450 | 2950 | 3450 | |
| B5 | 800 | 1300 | 2300 | 2800 | 3300 | |
| L1 | 5300 | 5300 | 5650 | 5850 | 5850 | |
| L2 | 250 | 250 | 250 | 300 | 300 | |
| L3 | 4600 | 4600 | 4950 | 5050 | 5050 | |
| H1 | 200 | 200 | 250 | 250 | 250 | |
| H2 | 150 | 150 | 150 | 150 | 150 | |
| H3 | 300 | 300 | 300 | 300 | 300 | |
Application
The DT belt dewatering machine is mainly used for the dewatering of residual sludge or mixed sludge in the biochemical treatment of municipal sewage to reduce its volume to facilitate further landfill, incineration and other treatments. It can be applied to water supply, drainage, papermaking, etc. Dewatering of sludge in various industries such as foundry, leather, textile, chemical, food, etc.
Packing and Delivery
1. Waterproof packing with the international export standard by
20ft, 40ft, 40hp container. Equipment Fittings, Electric Motor and
Power Cabinet will be packed in Wooden Case or Iron Box. Other
Equipment will be packed by Color-Stripes Plastic Cloth.
2. The whole plant machinery size are large as normal, so we will
use Waterproof cloth to pack all of them. The motor, gear box or
other easily damaged parts, we will put them into box. We have a
professional shipping department, they will try their best to save
your container quantity.
Why Choose Us?
1. Longdai has more than 10 years of experience in wastewater and sludge treatment.
2. We introduce German technology, thus our product is much better than other Chinese manufacturers.
3. We only use the best parts from best supplier.
4. We have our own R&D center and complete manufacture system.
FAQ:
Q: Do You Offer After-Sales Service?
A: Video Technical Support, Online Support,Spare Parts, Field Maintenance Repair Service
Q: How Long is Your Warranty?
A: 2 Years After The Arrival Of The Goods. During This Period, As
Long As It Is Not a Man-Made Damage, We Send The Damaged Parts Free
Of Charge.
Q: What About Your Produce Time? What Kind Of Transportation Do You Offer?
A:Within 30 Days Against Down Payment. Air, Land & Sea .
Q: What Kind Of Payment Do You Accept?
A: T/T, L/C, Paypal, Cash, D/P, D/A, Unionpay
