Home Companies Sinuo Testing Equipment Co. , Limited

Toilet Seat Mechanical Strength Test Machine IEC 60335-2-84 Mechanical Stresses Testing

Sinuo Testing Equipment Co. , Limited

Contact Us

[China] country

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Inquir Now

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Toilet Seat Mechanical Strength Test Machine IEC 60335-2-84 Mechanical Stresses Testing

Country/Region china
City & Province guangzhou guangdong
Categories Optical Instruments
InquireNow

Product Details

 

Toilet Seat Mechanical Strength Test Machine IEC 60335-2-84 Mechanical Stresses Testing

 

Product information:

 

Standard:IEC 60335-2-84 “Household and similar electrical appliances-Safety-Party 2-84: Particular requirements for toilet appliances” clause 21.103.1&21.103.2. It used to check whether the toilet seats have adequate mechanical strength and are constructed to withstand repeated mechanical stresses that may be expected to occur during normal use.

 

 

Test Contents:

 

1. 1250N force test:

The appliance is subjected to an evenly distributed force of 1250N applied perpendicularly to the seat for 4s by a rubber disc having a thickness of 10mm, a diameter of 300 mm and a shore A hardness of 70°, with a steel disc having a thickness of 5mm and a diameter of 30mm attached on its upper surface. The test is carried out 20 000 times.

 

2. 890N force test:

The appliance is subjected to an evenly distributed force of 890N applied perpendicularly on each side of the seat for 1s with 0.5 s interval by a rubber disc having a thickness of 19mm, a diameter of 76 mm and a shore A hardness of 70°. The test is carried out 10 000 cycles. One cycle consists of applying the force to one side and the other.

 

 

Technical Parameters:

 

Test stationTwo stations can be independently tested at the same time; (one station for 1250N force test , the other station for 890N force test)
Force applied methodAdopts the air cylinder drive method
Test contents

1. 1250N force test

2. 890N force test

Force sensor range0-2000N, accuracy class 0.5
Force adjustment methodBy adjusting the air pressure
Pressure display modeDigital pressure sensor
Equipment frameIndustrial aluminum bracket
Air cylinder for 1250N force testCylinder inner diameter Ø63mm, stroke 150mm
Specification of disc for 1250N force testDiameter Ø300mm, thickness 5mm steel plate + 10mm rubber plate (shore A hardness of 70°)
Force applied time for 1250N force test1~ 10S can be preset
Cycles of 1250N force test1 ~ 99999 cycles can be set
Air cylinder for 890N force testCylinder inner diameter Ø50mm, stroke 125mm
Specification of disc for 890N force testDiameter Ø76.2mm, thickness 19mm rubber plate, shore A hardness of 70°
Force applied time for 890N force test0-99.9S can be preset
Cycles of 890N force test1 ~ 99999 cycles can be set
Force applied angleAdjustable left and right application angle
Force measurement methodCalibrate the air pressure when setting the force value through the load cell before the test, and maintain the test air pressure during the test to ensure the test force value
Control methodPLC and 7” touch screen
Power supplySingle phase 220V, 60Hz, 1KW
Machine dimensionsAbout 1700X700X1400mm (length, width and height)

 

 

 

 

 

Hot Products

IEC 62552-1 Refrigerator & Freezer Performance Test Chamber 4 Test Station Overview: This refrigerat...
IEC 61855 Figure 9 Dryer Air Volume Test System For Air Volume Testing Computer Operation Standards: ...
BS EN 60456 Washing Machine Energy Efficiency Test System Product introduction: This laboratory is ...
IEC 60456 Wahing Machine & Dishwasher Performance Test Chamber 4 Test Stations Overview: This ...
IEC 60335-2-3 Figure 102 Simulated Hand Testing Equipment Stainless Steel Standard: This simulated ...
IEC 60335-2-40 Clause 30.101 Figure 105 Ball Pressure Test Apparatus 30mm for weight area Product ...