|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 61851-1 Insulated Handle IPXXB Standard Test Finger With Alligator Clip
Product overview:
This is a precision test finger made in accordance with IEC61032 figure 2 test probe B, it is required by IEC 61851-1 clause 8 and 12.4,etc.
Application:
This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger.
This test finger probe consists of dito,finger,base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°.
Technical parameters:
| Model | SN2210-2 |
| Name | Standard test finger |
| Joint 1 | 30±0.2 (mm) |
| Joint 2 | 60±0.2 (mm) |
| Finger length | 80±0.2 (mm) |
| Fingertip to baffle | 180±0.2 (mm) |
| Cylindrical | R2±0.05 (mm) |
| Spherical | S4±0.05 (mm) |
| Fingertip cutting bevel angle | 37o 0 -10’ |
| Fingertip taper | 14 o 0 -10’ |
| Test finger diameter | Ф12 0 -0.05 (mm) |
| A-A Section diameter | Ф50 (mm) |
| A-A Section width | 20±0.2 (mm) |
| Baffle diameter | Ф75±0.2 (mm) |
| Baffle thickness | 5±0.5 (mm) |
Customizable:
It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle to connect with a pull and push force gauge to achieve specific force.
