|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 62368-1 Clause Y.4.3 Tensile Strength And Elongation Test Apparatus
Product information:
This Tensile Strength and Elongation Test Apparatus is designed and manufactured according to the standard requirement of IEC 62368-1:2018 Annex C, Annex G.5, clause Y.4.3, etc. It is used to test the deterioration, deformation, melting or cracking of the gasket material at the conclusion of the temperature conditioning.
Technical parameters:
| Control method | LCD digital display controller working platform, all parameter settings are processed in the form of dialog box. |
Real-time display | Force value, peak value, speed, test times. |
| Instrument storage | 50 test results, operator can delete any one or more groups. |
Printout | Connect to a micro thermal printer output. |
Unit of strength | N, kn, kgf, gf and lbf. |
Displacement unit | Mm, cm and inch. |
Strength unit | Pa, kpa, Mpa, kgf / cm2, lbf / in2. |
Protective measures | Over-stroke protection, over-strength protection, over-time protection, external limit protection and etc. |
Display | English visual display |
Crushing and automatic shutdown | High sensitivity, instantaneous determination |
Input setting | Test, rise, fall, return speed |
Test automatically | The test returns automatically and quickly after the test is completed, avoiding long waiting and speeding up the test efficiency. |
Test result | The test is automatically recorded and saved without manual storage. |
Test items and units | Available to multiple test standards |
High accuracy | Adopting high-precision S-type sensor, the maximum accuracy can reach 0.5%. |
| Built-in special calibration mode | It is convenient for third-party metrology and calibration institutions to perform calibration and certification on the instrument. |
Transmission | Taiwan TBI high-precision ball screw transmission, high efficiency, durability and high straightness. |
Motor
| High performance motor, low noise, small vibration and long service life. |
Sensor | High-quality S-type alloy steel sensor, high precision, strong resistance to external force and overload. |
| External chamber material | It is made of A3 steel plate, electrostatic powder spraying and plastic coating. |
Equipment characteristics
Control method | LCD digital display controller working platform, all parameter settings are processed in the form of dialog box. |
Real-time display | Force value, peak value, speed, test times. |
Instrument storage | 50 test results, operator can delete any one or more groups. |
Printout | Connect to a micro thermal printer output. |
Unit of strength | N, kn, kgf, gf and lbf. |
| Displacement unit | Mm, cm and inch. |
Strength unit | Pa, kpa, Mpa, kgf / cm2, lbf / in2. |
Protective measures | Over-stroke protection, over-strength protection, over-time protection, external limit protection and etc |
Display | English visual display |
Crushing and automatic shutdown | High sensitivity, instantaneous determination |
Input setting | Test, rise, fall, return speed |
Test automatically | The test returns automatically and quickly after the test is completed, avoiding long waiting and speeding up the test efficiency |
Test result | The test is automatically recorded and saved without manual storage |
Test items and units | Available to multiple test standards. |
High accuracy | Adopting high-precision S-type sensor, the maximum accuracy can reach 0.5%. |
Built-in special calibration mode, | It is convenient for third-party metrology and calibration institutions to perform calibration and certification on the instrument. |
| Transmission | Taiwan TBI high-precision ball screw transmission, high efficiency, durability and high straightness. |
Motor | High performance motor, low noise, small vibration and long service life. |
Sensor | High-quality S-type alloy steel sensor, high precision, strong resistance to external force and overload. |
| External chamber material | It is made of A3 steel plate, electrostatic powder spraying and plastic coating. |
