|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60335-2-25 Clause 18 Microwave Oven Door Endurance Test Equipment
Brief Introduction:
It is conforms the standard of IEC60335-2-25:2006 clause 18.This apparatus is a special tester which is used to test the abrasion resistance of the microwave oven door system, including the structure of the hinge, microwave seal and other related parts during use.
The mechanical arm is driven by the motor which drives the vacuum suction cup to suck the microwave oven door to open and close at a certain speed and angle to verify the reliability of the door system including hinges, microwave oven seals and other related components.
Technical Parameters:
| Test station | Single station |
| Control method | PLC intelligent control,7-inch humanized touch interface operation |
| Drive | Stepper motor drive |
| Sample clamping method | Vacuum suction cup, pneumatic |
| Opening/Closing speed | 0-360°/s,adjustable |
| Interval time of opening/closing | 0-99.9s,adjustable |
| Test frequency | 6 times/min, a cycle is formed by the door opening/closing process and the pause time |
| The angle of opening/closing | 0-135°,adjustable |
| Test times | 0-999999 time,adjustable |
| Load currency | Voltage 0-250V, adjustable, current can be displayed. It is equipped with 10A power socket which can work with samples below 2000W |
| Microwave oven door interlock switch button, pneumatic | Microwave oven door interlock switch button, pneumatic |
