Sinuo Testing Equipment Co. , Limited |
Verified Suppliers
|
|
IEC 62196-1 Electric Vehicle Connectors Temperature Change Test Chamber
Standards:
IEC60068-2-1:2007 "Environmental Testing-Part 2-1:Tests-Test A:Cold,IDT"
IEC60068-2-2:2007 "Environmental Testing-Part 2-1:Tests- Test B-Dry heat,IDT"
IEC60068-2-78:2001 "Environmental Testing-Part 2-78:Tests-Test Cab: Damp heat,steady state,IDT"
IEC60068-2-30:2005 "Environmental Testing-Part 2-30:Tests-Test Db: Damp heat,cyclic(12h+12h cycle),IDT"
Product overview:
The equipment sample scope is electronic appliances, food,
automobile, rubber plastic materials, metal and other products of
parts and materials, such as optical fiber, LCD, crystal,
inductance, PCB, battery, computer, mobile phone, rubber, plastic
and other products.
Mainly used for electronic, electrical, electrical, plastic and
other raw materials and devices for cold resistance, heat
resistance, moisture resistance, dry resistance test, the purpose
is to confirm the product in high and low temperature rapid
alternating humid heat environment storage, transportation, use of
reliable performance.
It adopts heating, humidification and refrigeration system to
realize the control and change of the environment temperature and
humidity in the box body, simulating the environment temperature
and humidity required by the product and alternating procedures
Structure:
The machine adopts a closed box structure, features are as follows:
1, energy saving and consumption reduction: using gas-liquid bypass
mode to adjust the cooling capacity, to achieve the constant
temperature and humidity.
2, easy to operate: using Velon programmable temperature and
humidity controller (7 inch 16-bit true color touch screen),
experimental data recording, processing mode is flexible
3, high reliability: key parts are imported parts, to ensure
service life and reliability; Efficient oil separator ensures
compressor service life.
Control system:
Touch screen: Using Vellon programmable temperature and humidity
controller (7 inch 16-bit true color touch screen)
Temperature control: PID self-tuning, using A class PT100 platinum
resistance sensor
Function: fixed value test and program test
Constant test: When the test environment requires only a single
temperature and humidity, select this mode to set the required
temperature, humidity and running time
Program test: when the test environment requires a variety of
temperature and humidity, select this mode, you can set the
temperature, humidity and running time of each program, you can set
the program running sequence, you can use 100 program groups
Features:
Control and operation | PLC and touch screen intelligent control system |
Box size (optional) | 408L: Inner WDH=800 x 600 x 850mm, outer WDH=1060 x 2300 x 1880mm |
Temperature range (optional) | 960L: Inner WDH=1800×800×1000mm, outer WDH=2200×3350×2050mm |
Linear speed | 1000L: WDH for inner container =1000 x 1000 x 1000mm, WDH for outer container =1700 x 3000 x 2200mm |
The temperature deviation | A: - 20 ~ 150 ℃; |
Temperature fluctuation | B: - 40 ~ 150 ℃; |