|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 62196-1 Electric Vehicle Connectors Screw Terminal Testing Equipment
Equipment Overview:
This testing machine conforms to IEC 62196-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is good. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage.
The testing times can be preset before the test, and the test
machine will stop automatically with completion alarm when the
preset test times are reached.
Technical Parameters:
| Parameter Name | Parameter Data |
| Power Supply | Match client's local power supply |
| Test Station | Single |
| Test Rate | (10 ± 2) r/min for IEC 62196-1:2020, IEC 60884-1, etc. (9±1) r/min for other standards such as UL 498 |
| Diameter of Gyration | 75mm for IEC 62196-1:2020, IEC 60884-1, etc. 76mm for other standards such as UL 498 |
| Test Times | 1-999999times |
| Load Weight | 0.4-22.7Kg |
| Test Height | 210-600mm adjustable |
| Diameter of Bushing | 6.5mm, 9.5mm, 13mm, 14.5mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm, 28.6mm |
| Equipment Dimensions & Weight | L 650mm* W 500mm * H 2010mm, approx. 68KG |
Specimen Installation:
Connect the terminal to the corresponding conductor, then clamp the
terminal tighten.
Pass the conductor through the corresponding bushing and hang the
corresponding weight.
